Sony DVP-NS300 Service Manual page 19

QQ
3 7 63 1515 0
8
Press X/x to select a geographic area as
the playback limitation level, then press
ENTER.
The area is selected.
When you select "OTHERS t," select
and enter the standard code in the table on
page 51 using X/x.
9
Press ENTER.
The selection items for "LEVEL" are
displayed.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL: OFF
STANDARD:
OFF
CHANGE PASSWORD
8:
7: NC17
6: R
5:
10
Select the level you want using X/x,
then press ENTER.
Parental Control setting is complete.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL: 4: PG13
STANDARD: USA
CHANGE PASSWORD
The lower the value, the more strict the
limitation.
TE
L 13942296513
50
Operation Sound Effects
(Sound Feedback)
The player beeps when the following
operations are performed.
The default setting of the Sound Feedback
function is set to off.
Operation Operation sound
Power is turned on One beep
Power is turned off Two beeps
H is pressed
One beep
X is pressed Two beeps
Playback is stopped One long beep
Operation is not possible Three beeps
To set Sound Feedback
A
POWER
Power Indicator
X
[/1
1
Press POWER on the player, then press
[/1 on the remote.
The power indicator lights up in green.
www
When there is a disc in the player, press
A and remove the disc. Then press A
again to close the disc tray.
2
Press and hold X on the player for more
.
than two seconds.
Yo u will hear one beep and the Sound
Feedback function is turned on.
52
http://www.xiaoyu163.com
If you make a mistake
Press O RETURN to go back to the
previous screen.
To turn off the Control Menu
Press DISPLAY repeatedly until the Control
Menu is turned off.
To turn off the Parental Control
function and play the DVD after
entering your password
Set, "LEVEL" to "OFF" in Step 10.
To change the password
1
In Step 7, select "CHANGE
PASSWORD t" using x, then press
ENTER.
The display for entering the password
appears.
2
Follow Step 6 to enter a new password.
To turn off the Sound Feedback
function
When there is no disc in the player, press and
hold X on the player for more than two
seconds. You will hear two beeps and the
Sound Feedback function is turned off.
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
Playing the disc for which Parental
Control is set
1
Insert the disc and press H.
The Control Bar appears.
PASSWORD
2
Enter your 4-digit password using X/x to
select the digit, followed by c to move
the cursor. Then press ENTER.
The player starts playback.
z
If you forget your password, remove the disc and
repeat Step 1 to 5 of "Limiting playback by children."
When you are asked to enter your password, enter
"199703," then press ENTER. (Press c after the 4th
digit to allow the entire 6 digit number to be entered.)
The display will ask you to enter a new 4-digit
password. After you enter a new 4-digit password in
Step 6, replace the disc in the player and press H.
When the Control Bar appears, enter your new
password.
Note
When you play DVDs which do not have the Parental
Control function, playback cannot be limited on this
player.
Q Q
3 6 7 1 3
Controlling Your TV with
the Supplied Remote
By adjusting the remote signal, you can
control your TV with the supplied remote.
Controlling TVs with the remote
TV [/1
C/X/x/c
1
Hold down TV [/1, and enter your TV's
manufacturer's code (see the table
below) using C/X/x/c.
2
Release TV [/1.
Manufacturer's codes of controllable
TVs.
Manufacture Press C/X/x/c to input code
Sony (default) X X
General Electric X C
JVC x X
Panasonic c c
Philips X c
Quasar c x
RCA X C
Samsung x c
Sanyo X x
.
Sears c C or X C
Sharp c x
Toshiba c C
Zenith c X
1-12
9 4 2 8
Area Code
Standard Code Standard Code
number number
Argentina 2044 Korea
Australia 2047 Malaysia
Austria 2046 Mexico
Belgium 2057 Netherlands
Brazil 2070 New Zealand
Canada 2079 Norway
Chile 2090 Pakistan
China 2092 Philippines
Denmark 2115 Portugal
Finland 2165 Russia
France 2174 Singapore
Germany 2109 Spain
Hong Kong` 2219 Sweden
India 2248 Switzerland
Indonesia 2238 Taiwan
Italy 2254 Thailand
Japan 2276 United Kingdom
1 5 0 5 8 2 9 9 4
Notes
• If you enter a new manufacturer's code, the code
previously entered will be erased.
• When you replace the batteries of the remote, the
code you have set may be reset to the default setting.
Set the appropriate code again.
Controlling the TV
By adjusting remote signal, you can control
the sound level, input source, and power
switch of your TV with the supplied remote.
TV [/1
TV/VIDEO
VOL +/–
You can control your TV using the buttons
below.
By pressing Yo u can
TV [/1 Turn the TV on or off
VOL (volume) Adjust the volume of the TV
+/–
TV/VIDEO Switch the TV's input source
between the TV and other input
source
Note
Depending on the units being connected, you may not
be able to control your TV or to use some of the
buttons.
m
co
9 9
2304
2363
2362
2376
2390
2379
2427
2424
2436
2489
2501
2149
2499
2086
2543
2528
218 4
2 8 9 9
51
53