GE CS5500 Programming Manual page 59

Term
Fn Function
Follower/Access
For Zones On Siren
Timeout
Force Armable
Force arming
Force Default Zone
Types
Format Override
FTC
FTC Dial Attempts
Full arm
Function Keys
Functions
G
Group Bypass
Group Shunt
Definition
A menu option that specifies the function of the selected function key. Possible
functions are:
•
Arm Away (asks for code if quick arm disabled)
•
Arm Stay
•
Bypass Zones (asks for code if required for bypass)
•
Group Bypass
•
X-10 Device Control (start up X-10 device control mode)
•
Alarm Memory
•
Service Check
•
Reset Smoke Detector
•
Answer U/D Call (asks for code if required for download)
•
Begin U/D Call
•
Silent Exit
•
Chime
•
PA Alarm
•
MA Alarm
•
Fire Alarm
•
Change Phone Number (asks for code, which must be a master code, and
prompts for the phone number to change)
See also User Phone Editing
A zone type that acts like a normal burglary zone except during entry and exit
times when it is inhibited. The entry time is started when a Delay zone is opened.
The zone is instant when the system is armed and no entry or exit delay is timed.
See also Delay 1 and Delay 2
A menu option that sends a restore report to the central station when the siren
times out.
See also Send Restores
A zone characteristic that allows the zone to be force armed.
A feature of the CSx75 which allows the system to be armed with open zones. If a
force armable zone is open, the Ready LED flashes. When the exit delay expires,
the open zones are bypassed. If these zones are closed during the arming cycle,
they are unbypassed and become armed.
See also Bypass on Force Arm and Force Armable
A menu option that uses the default zone types in the country defaults for the
selected country rather than configured zone types.
A menu option that allows the installer to build communication formats if using a
non-standard central station. Consult technical support before using this option.
See Fail to Communicate
A menu entry that groups options related to the number of attempts that are made
to a specified phone number, before the Fail To Communicate condition appears.
(Communications)
A menu option that specifies the number of dial attempts that are made by the
GSM module to a specified phone number, before the Fail To Communicate
condition appears. (CS7001 GSM Module)
All of the possible areas displayed on a multi-area keypad are armed.
A menu entry that groups all programmable function key options.
Function keys are dedicated for a particular function as programmed by the
installer.
A menu entry that groups the functions that can be linked between a CS1700
proximity reader and X-10 functions.
A zone characteristic that allows the user to bypass multiple zones with a single
operation.
See Group Bypass