Service Aids; Field Programming; Table 4-2. Service Aids - Motorola APX 5000 Service Manual

Sec 1: 4-2
4.2

Service Aids

Refer to Table 4-2
this family of radios. These kits and/or parts are available from the Radio Products and Solutions
Organization offices listed in
these items are available from Motorola, most are standard shop equipment items, and any
equivalent item capable of the same performance may be substituted for the item listed.
Motorola Part
Number
5880384G68 SMA to BNC Adapter
66009254001 APX Battery Adapter
66009256001 Volume Potentiometer Outer
Spanner Bit
66009258001 Antenna Spanner Bit
66009259001 Vacuum Adapter
66009260002 Board Analysis Fixture
NLN9839_ Vacuum Pump Kit
NTN4265_ Pressure Pump Kit
RVN5224_ Customer Programming
Software (CPS) and Tuner
Software
PMKN4012_ Programming Cable
PMKN4013_ Programming/Service Cable
RLN4510_ 7.5 Volt Universal Battery
Eliminator
RLN4460_ Portable Test Set
4.3

Field Programming

This family of radios can be aligned and programmed in the field. This requires specific equipment
and special instructions. Refer to the online help in the Customer Programming Software (CPS) for
complete field programming information.
Recommended Test Equipment and Service Aids: Service Aids
for a listing and description of the service aids designed specifically for servicing
"Appendix B Replacement Parts Ordering" on page

Table 4-2. Service Aids

Description Application
Adapts radio's antenna port to BNC cabling of test equipment.
Used in place of battery to connect radio to an external power
supply. Requires RLN4510_.
Used to assemble and disassemble the spanner nut on the
volume potentiometer.
Used to assemble and disassemble the spanner nut on the
antenna bushing.
Submersible radios only. Connects the vacuum/pressure hose
to the radio.
Special fixture that allows radio's internal board to be mounted
externally. Provides easy access to electronic circuits,
required for board-level troubleshooting.
Submersible radios only. Vacuum pump with gauge and
vacuum hose. Requires 66009259001 Adapter Kit.
Submersible radios only. Pressure pump with gauge and
pressure hose. Requires 66009259001 Adapter Kit.
CPS allows customer-specific programming of modes and
features. Tuner software required to perform alignment of
radio parameters.
Used to program the radio through Customer
Programming Software and Tuner Software.
Used to program and service the radio through Customer
Programming Software and Tuner Software.
Used in conjunction with the 66009254001 to adjust the
supply voltage to 7.5 Vdc. Allows a multimeter to be attached
for monitoring and adjusting voltage and current levels.
Used for radio performance checks. Connects to radio's
universal connector and allows remote switching and signal
injection/outputs for test equipment measurements.
B-1. While all of