Sec 2: 8-34
Disassembly/Reassembly Procedures: Radio Reassembly
4. Tighten the RF and VOCON Board screw (45) by hand first to avoid cross threading. Then,
torque the screw with a Torx IP8 Bit and a torque Driver to 8 in-lbs.
NOTE: Do not connect the Antenna coax at this time. Front Housing Assembly (1) must be
snapped in place prior to connecting the coax.
RF Board Assembly (9)
Small Coax Cable
Connector
Figure 8-46. Connect RF Board to VOCON Board