Table of Contents
Advertisement
USE
When one of the four automatic working
programs has been chosen select the forward
speed by means of the lever under the steering
wheel.
The functions of the lever are descibed in the
figure:
1- forward speed
2- reverse speed
3- horn
4- front light On/Off
Press the accelerator pedal to start the job.
Note: when either the accelerator pedal is
released or the lever for the speed
selection is set to the neutral position the
automatic switch Off of all functions will
occurr within some seconds (AUTO
POWER OFF); when in this condition the
indicator of the selected automatic
program will start lighting. To restart the
job just press the accelerator pedal
(AUTO POWER ON).
A safety device is located inside the operator
seat: the drive function - either forward or
reverse - is disabled as soon as the operator will
stand up or leave the seat.
Note: when the reverse speed is selected the
automatic lifting of the squeegee will
occur, then the reverse movement will be
enabled. When running reverse an
acoustic signal will be heared (all
functions will remain enabled).
The machine stops automatically as soon as the
accelerator pedal is released; in order to get a
quicker breaking the mechanical brake pedal
can be used (see the figure).
The machine is equipped with an emergency
stop red button; by pressing the button (red light
On) the stop of the traction and of all other
functions is got.
To re-enable the machine turn the emergency
button clockwise, as per the arrow on the button
itself. To restart the job it is necessary to select
again the preferred automatic working program.
17
S31EUK4090SY(2)99-01
4
2
1
3
Advertisement
Table of Contents
