Miele CM 5000 Operating Instructions Manual page 59

Message
The following
appears in the
display, even
though the drip tray
is empty:
EMPTY THE DRIP
TRAY
You can hear the
noise of the pump
and the following
appears in the
display:
FILL WATER
CONTAINER AND
PLACE IN THE
MACHINE
Dispensing stops
and the following
message appears in
the display:
PROCESS STOPPED
WATER CONT. EMPTY
Possible cause and remedy
The drip tray is not sitting correctly.
^ Push the drip tray into the coffee machine until it clicks
into position.
or
The metal contact discs are dirty.
^ Clean the discs and then dry them thoroughly.
or
^ The drip tray sensing mechanism is not working.
^ Switch the coffee machine off and then back on again
using the master switch.
^ If this fault message appears in the display again,
contact Miele.
The coffee machine is attempting to draw in water although
the water tank is empty. Air is present in the pipework.
^ Fill the water container with fresh, cold tap water.
SYSTEM FILLING UP - OPEN THE VALVE will appear in the
display.
^ Turn the valve to the I symbol.
^ Turn the valve to 0 when prompted.
There is too little water in the container.
^ Fill the water container with fresh tap water and put it
back into the machine.
^ Press the OK button.
The following message will appear in the display:
CONTINUE DISPENSING - YES B.
Press the OK button to continue dispensing, or select NO
to cancel preparation.
Problem solving guide
59