Introduction
Before You Begin
1
2
3
4
5
6
7
Home
Print
Installation
Rear Panel
The rear panel provides cabling connectors, status lights, and the power receptacle.
Item
1
LINK/ACT
2
3
100
4
USB
5
•
6
CABLE
7
POWER
X
Exit
Configuration
Description
When the light is on, the Ethernet connection is available. A blinking
light indicates data is being transferred.
This port is the Ethernet connector that transfers data to and from
your computer.
The light is on when a 100Base-T link is established and off when a
10Base-T link is established.
This port provides a direct connection to USB equipped computers.
This is the recessed reset button.
This port transfers data to and from the service provider.
This connector provides power to the SB4200.
4
Troubleshooting
Legal