Motorola SURFboard SB4200 User Manual page 13

Introduction Before You Begin
The Ethernet card must be installed before the
SB4200. If it isn't, follow the installation
instructions that came with your Ethernet
card.
Home Print
Installation
System Requirements
HTML Browser
Any standard HTML (web) browser works with the SB4200.
Ethernet Card or SB4200 CD-ROM Containing the USB
Software
Any standard 10/100Base-T Ethernet card operates with the SB4200. This is not needed
if connecting to the USB port. The Ethernet card must be installed before the SB4200. If
it is not, follow the installation instructions included with your Ethernet card.
The USB connection is supported by Windows 98, Windows 2000, and Windows Me and
requires special software to operate. The USB driver software files are on the CD-ROM
supplied with your SB4200.
The USB drivers can be upgraded from the Internet. Check our website for information,
http://www.motorola.com/broadband.
Your computer must be configured for TCP/IP and have an IP address for the SB4200 to
operate. Your service provider furnishes the IP address.
X
Exit
Configuration
8
Troubleshooting Legal