Set Up The Motorola Netopia® Pocket Gateway - Motorola 2200 Administrator's Handbook

Administrator's Handbook
Set up the Motorola Netopia® Pocket Gateway
Your Motorola Netopia® 3342N/3352N Pocket Gateway comes with its own installation wizard.
• If you are using Windows 98, insert the CD.
• If you are using Windows XP, Windows 2000, Windows NT or Windows Vista, you don't even need the
CD.
Follow these easy setup steps:
Plug the Motorola Netopia® Pocket Gateway into a USB port on your PC.
1.
Whether you use the CD (Windows 98) or not (all other Windows versions), on Windows-based
2.
PCs, the Motorola Netopia® Installation Wizard will launch automatically.
The Motorola Netopia® Installation Wizard will assist you to configure your PC to work with the Motorola
Netopia® pocket Gateway. Follow the on-screen instructions.
The Motorola Netopia® Installation Wizard performs a series of checks on your system and then will
install USB drivers for your connection.
Place the Motorola Netopia® Pocket Gateway near your PC so you can see it easily.
3.
Make sure any cables are kept away from power cords, fluorescent lighting fixtures, and other sources
of electrical interference.
When the wizard prompts you, connect the RJ-11 Telephone Cable from the DSL port on the
4.
Motorola Netopia® Pocket Gateway to the ADSL phone jack.
DSL
The indicator light should blink for up to two minutes and then come on solid green once the device
is connected to your computer.
USB port
phone jack
RJ-11 phone cable
28
To proceed, click the
Netopia Pocket Gateway/
Next
button.