Saving The Current Configuration (Settings Tab) - D-Link DSN-1100 X Stack User Manual

5.2.3 Saving the Current Configuration (Settings Tab)

Best practices dictate that you save the xStack Storage system configuration after you
configure the array for the first time and, thereafter, each time you change the
configuration. You can then use the procedure in section 5.2.4 to restore the configuration if
necessary, without having to re-enter the settings from scratch. Saving the current
configuration also allows you to propagate the configuration to other xStack Storage systems
that will use the same settings.
When you save the current configuration, the following settings are saved in a configuration
file:
Management port IP address

All targets

All the initiators that have access to the targets, including their access rights and CHAP

secrets
All volumes and access parameters

User account information

Battery policy

To save the current configuration:
1. In the System Administration View, click the Settings tab to display the general settings
in Figure 5-6. Or if you are already in the Settings tab but another screen is displayed,
click the General button on the left side of the Settings tab:
74 Chapter 5 System Administration
Figure 5-5. Example of the Schedule Tab