Yamaha 2009 XP500Y TMAX Service Manual page 185

LS
2. Install:
• Pivot shaft "1"
• Washer "2"
• Pivot shaft nut "3"
TIP
Install the parts to the swingarm "4" temporarily,
making sure that the portion "a" of the pivot shaft
does not protrude past the swingarm surface "b".
a
b
3. Install:
• Transmission chain drive assembly
• Dowel pins
• Swingarm
• Swingarm bolts
Swingarm bolt
40 Nm (4.0 m·kg, 29 ft·lb)
4. Tighten:
• Pivot shaft
• Pivot shaft nut
Pivot shaft
7 Nm (0.7 m·kg, 5.1 ft·lb)
Pivot shaft nut
100 Nm (10.0 m·kg, 72 ft·lb)
M MMM M MMM M M MMM M M MMM M
a. With your fingers, screw in the pivot shaft until
it touches the collar, and then tighten the piv-
ot shaft to the specified torque.
b. Tighten the pivot shaft nut to the specified
torque.
L LLL L LLL L L LLL L L LLL L
SWINGARM AND TRANSMISSION CHAIN DRIVE
1
4
2
3
M MMM M M MMM M MMM
L LLL L L LLL L LLL
4-70
5. Fill:
• Transmission chain drive case
Refer to "CHANGING THE CHAIN DRIVE
OIL" on page 3-25.
6. Check:
• Chain drive oil level
Refer to "CHECKING THE CHAIN DRIVE
OIL LEVEL" on page 3-24.