Table of Contents
Advertisement
Other convenient functions
Power failure compensation circuit
The unit is equipped with an internal power failure com-
pensation circuit. When the unit has been charged for
48 hours (full), the date, time, timer record settings, and
menu settings are kept up to 1 month without power.
The accuracy of the time will decline if the power plug is
not connected to the wall outlet for and extensive pe-
riod. When the unit is with out power for a long time it is
recommended to check the current time setting.
Power failure reset recording
If there is a power failure during recording or when the
MAIN switch is turned OFF, the recording will resume
after the power is restored. If there is a power failure
during timer recording, the recording will resume after
the power is restored when within the set time period of
the timer. For alarm recording, recording will stop even
within the set recording time.
The playback video at the start position where re-
cording is resumed after a power failure may be dis-
turbed and the search function may not operate prop-
erly.
Log function for when power failure occurs
while the unit is in operation or the MAIN
switch on the rear of the unit is turned OFF
In the event of power failure or the MAIN switch on the
rear of the unit is turned OFF, up to 1000 times (includ-
ing the time of failure and warning log displays as well
as other warning items) are saved in the <WARNING
LOG LIST> (
see page 62), and are displayed in red
on the screen.
RESET button
When pressing the RESET button on the rear of the
unit with a ballpoint pen, etc., the unit is reset and the
power turns off.
The menu settings, the current time and video data
are kept even when resetting the unit.
HDD SETTING
On the unit, "MIRRORING" or "PARTITION" can be se-
lected for the HDD recording mode (
Setting ( default : "NORMAL" )
"NORMAL", "MIRRORING", "PARTITION"
MIRRORING
Saving the data on a second drive (mirroring) with the
same capacity, reduces the risk of data loss due to an
HDD crash.
1. Turn ON the MAIN switch on the rear of the unit, and wait
until the ACCESS indicator goes off. Hold down the REC/STOP
button, and press the POWER button on the front of the unit.
• The <INITIALIZATION> screen is displayed.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
82
2. Select "HDD SETTING" by turning the JOG dial, display the
"MIRRORING" setting, and turn the SHUTTLE ring clockwise.
3. Select "INITIALIZATION" by turning the JOG dial, and turn
the SHUTTLE ring clockwise.
• The setting is made, and initialization commences.
Initialization deletes all data in the HDD.
see page 22).
<INITIALIZATION>
>>ID4•ID5
ARCHIVE•COPY
HDD SETTING
NORMAL
BOOT UP SIZE
POWER OFF
INITIALIZATION
ALL DATA WILL BE ERASED
WHEN PROCEED INITIALIZATION
<INITIALIZATION>
ID4•ID5
ARCHIVE•COPY
>>HDD SETTING
MIRRORING
BOOT UP SIZE
POWER OFF
INITIALIZATION
ALL DATA WILL BE ERASED
WHEN PROCEED INITIALIZATION
30S
30S
Advertisement
Table of Contents
