Table of Contents
Advertisement
3. Select "ON" by turning the JOG, and turn the SHUTTLE
ring clockwise.
• The setting is made, and the display stops flashing.
If a power failure occurs during archive, the ar-
chive will not restart automatically after the power is
restored. Press the ARCHIVE button to restart ar-
chive. When Timer record setting has been preset,
the archive will automatically restart after the power
is restored, but from the point that the unit started
archive before the power failure occurred.
ARCHIVE SOURCE HDD
The ARCHIVE device can be set to archive data from the
MAIN HDD or SUB HDD.
<HDD SETTINGS>
HDD REPEAT REC MAIN
HDD REPEAT REC SUB
HDD REPEAT PLAY
IM-CHECK PLAY
SEQUENTIAL PLAY
FIFO OVERWRITE MODE
>>ARCHIVE SOURCE HDD
ARCHIVE START POSITION RESET
This setting appears when "ARCHIVE•COPY" is
selected on "ID4•ID5" of the <INITIALIZATION>
screen, and the HDD SETTING is set to "PARTI-
TION".
Settings ( default : "MAIN" )
"MAIN" : Archive MAIN HDD only.
"SUB" : Archive SUB HDD only.
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "ARCHIVE SOURCE HDD" in
the <HDD SETTINGS> screen, and display the desired setting.
2. Turn the SHUTTLE ring counterclockwise or press the SET
UP button to exit.
3. Press the ARCHIVE button.
• The ARCHIVE device commences archive.
ARCHIVE START POSITION RESET
The unit automatically keeps track of the end point of HDD
archive. This function is used to reset this ARCHIVE POINT.
After reset, the ARCHIVE POINT returns to the position of
the earliest stored data.
<HDD SETTINGS>
HDD REPEAT REC MAIN
HDD REPEAT REC SUB
HDD REPEAT PLAY
IM-CHECK PLAY
SEQUENTIAL PLAY
FIFO OVERWRITE MODE
ARCHIVE SOURCE HDD
>>ARCHIVE START POSITION RESET
This setting appears when "ARCHIVE•COPY" is
selected on "ID4•ID5" of the <INITIALIZATION>
screen.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Operations
Confirm that the peripheral recording device is
correctly connected to ID4 or ID5, and "ARCHIVE•
COPY" is selected on "ID4•ID5" before making AR-
CHIVE START POSITION RESET settings.
1. Press the SET UP button } <SETTINGS> } <INITIAL SET
UP/INFORMATION> } Select "ARCHIVE START POSITION
RESET" in the <HDD SETTINGS> screen, turn the SHUTTLE
ring clockwise.
• The <ARCHIVE START POSITION RESET> screen is
displayed.
ON
OFF
OFF
OFF
OFF
2. Turn the SHUTTLE ring clockwise.
OFF
• The ARCHIVE POINT is reset.
MAIN
Points to be careful regarding archive
• When archive is performed during record, an
image may not be recorded at the time of an
archive start and an end. Be careful.
ON
OFF
OFF
OFF
OFF
OFF
MAIN
<ARCHIVE START POSITION RESET>
>>EXECUTE
55
Advertisement
Table of Contents
