Mitsubishi Electric DX-TL2500U Installation And Operation Manual page 64

<INITIAL SET UP/INFORMATION> (continued)
4) Unlock the PASSWORD LOCK of level 2.
• The PASSWORD LOCK of level 3 will be active.
When The PASSWORD LOCK of level 3 is active,
all operations are active except the SET UP button and
ALARM INTERRUPT button.
5) Unlock the PASSWORD LOCK of level 3.
• The PASSWORD LOCK of all levels will be unlocked.
Functions of all operations can be operable.
For level 1 and 2, press the LOCK button on the front
of the unit to display the <UNLOCK PASSWORD>
screen. Input the PASSWORD to unlock.
For level 3, press the SET UP button to display the <UN-
LOCK PASSWORD> screen and input the PASSWORD.
When the MAIN switch (main power) on the rear is
set to ON, the PASSWORD can be registered, set and
cancelled even when the POWER button on the front
is set to OFF.
To register the PASSWORD • • •
The PASSWORD is registered using a 4 digit number
using numbers from 0 ~ 9.
1. Press the SET UP button } <SETTINGS> } Select
"PASSWORD" in the <INITIAL SET UP/INFORMATION>
screen.
• The <PASSWORD> screen appears.
<PASSWORD>
>>OPERATION CONTROL
HDD DATA CLEAR
2-1. ( To register the PASSWORD for OPERATION CONTROL
for (level 1 to 3) • • • )
Confirm the cursor is positioned at left side of "OPERATION
CONTROL", turn the SHUTTLE ring clockwise.
• The <PASSWORD SETTING> screen appears.
<PASSWORD SETTING>
>>1
2
3
PRESS WARNING RESET BUTTON
TO CLEAR PASSWORD
SHUTTLE>>:TO SET PASSWORD
2-2. Confirm the cursor is moved to the left side of the level "1" ,
turn the SHUTTLE ring clockwise.
• The first input position of "FIRST" will be displayed in
reversed color and flashes.
<PASSWORD SETTING>
1
2
3
PRESS CAMERA BUTTON TO ENTER
PASSWORD
The PASSWORD may consist of the numbers from
1 to 9 which are assigned to the camera number but-
tons. 0 is assigned to the ZOOM button.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
64
FIRST SECOND
---- ----
---- ----
---- ----
FIRST SECOND
---- ----
---- ----
---- ----
2-3. Input 4 digits of the PASSWORD by pressing the camera
number buttons and the ZOOM button.
• The first input position of "SECOND" will be displayed
reversed color.
2-4. Input the PASSWORD entered in "FIRST" in "SECOND".
• The cursor moves to the left side of the setting of level 1.
<PASSWORD SETTING>
FIRST
>>1
2 ----
3 ----
PRESS WARNING RESET BUTTON
TO CLEAR PASSWORD
SHUTTLE>>:TO SET PASSWORD
Input the same number in "FIRST" and "SECOND".
The setting returns to step 2 if the different PASSWORD
number is inputted.
2-5. Repeat steps 2-2 ~ 2-4 to set level 2 and 3.
It is not necessary to input the PASSWORD all lev-
els 1, 2 and 3. Input the PASSWORD in the desired
level only.
2-6. Turn the SHUTTLE ring counterclockwise.
3-1. ( To register the PASSWORD for HDD DATA CLEAR for
(level 4) • • • )
Turn the JOG dial to move the cursor to "HDD DATA CLEAR",
turn the SHUTTLE ring clockwise.
• The <PASSWORD SETTING> screen appears.
<PASSWORD SETTING>
FIRST
>>4 ----
3-2. Repeat steps 2-2 ~ 2-4 to set level 4.
4. Turn the SHUTTLE ring counterclockwise, or press the
SET UP button.
To unlock the PASSWORD • • •
1. ( To unlock the PASSWORD for level 1 and 2 • • • )
Press the LOCK button.
• The <UNLOCK PASSWORD> screen appears.
<UNLOCK PASSWORD>
>>1 ----
2 ----
EXECUTE
SHUTTLE>>:TO SET PASSWORD
2. Confirm the cursor is moved to the left side of level "1" and
turn the SHUTTLE ring clockwise.
• The first digit reverse in color.
3. Input 4 digits of the PASSWORD by pressing the camera
number buttons or the ZOOM button.
• The cursor moves to the left side of the setting of level 1.
4. Turn the JOG dial to select the level "2" and turn the
SHUTTLE ring clockwise.
• The first input position will be displayed reversed color.
SECOND
----
----
SECOND
----