Reducing Wrinkles After The Spin Cycle Or Spinning Harder; Reducing Uneven Or Over-Dry Drying Results - Hitachi BD-S5500 Operating Instructions Manual

Reducing wrinkles after the spin cycle or spinning harder

The degree of wrinkles caused by the spin cycle varies depending on the wash load size and
type of laundry.
Before you start the operation, adjust the spin speed according to your situation.
Press <ON> to turn on the
power.
Press <<WASH>> to select
the program.
Press <SPIN/DRY LEVEL>
to change the setting.
Press <START>.
The operation starts.
This setting will be saved.
To change the setting, perform the
same operation.
Note that this setting is different
from the setting made with the
<<WASH DRY>> or <<DRY>> button
in the section below.

Reducing uneven or over-dry drying results

The drying results for laundry will vary depending on the wash load size and type of laundry.
Before you start the operation, adjust the level of drying according to your situation.
Press <ON> to turn on the
power.
Press <<WASH DRY>> or
<<DRY>> to select the program.
Press <SPIN/DRY LEVEL> to
change the setting.
Press <START>.
The operation starts.
This setting will be saved.
To change the setting, perform the same
operation.
Note that this setting is different from the
setting made with the <<WASH>> button
in the above section.
To change the default setting
The display changes with each press of the <SPIN/DRY LEVEL> button.
The drum rotation speed will be displayed in the remaining time indicator.
Use when spinning seems
insufficient or when you want
to shorten the drying time.
Default setting
Use if you are worried about
wrinkles caused by the spin
cycle.
You cannot change the setting to [SPIN LEVEL EXTRA] when
<SPIN (1 MIN)> is set.
You cannot change the setting when the [SOFT], [BLANKET], or
[DELICATE] program is selected.
To change the default setting
The display changes with each press of the <SPIN/DRY LEVEL> button.
Use when drying is uneven.
Default setting
Use when laundry is over-dried
(resulting laundry may be slightly moist).
You cannot change the setting when the [BLANKET],
[POWER SAVE STATIC DRY], or [FUZZY (15/30/60/90 MIN)]
program is selected.
69