Canon Finisher-AB1 Service Manual page 381

7) Place paper (A4 or LTR) [1] along the transport
guide. (Be sure to butt the paper against the
positioning plate.)
F-5-98
8) Press the push switch SW384 [1] once to start
stitching operation.
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
[1]
F-5-99
9) Remove the paper, and measure the stitching
position (A, B).
[2] [1]
10) If the measurements (A, B) are as indicated (i.e.,
F-5-100
if A - B is within 0.5 mm), press the push switch
SW385 [1] once to end adjustment mode. If not,
go through the following:
SW382
SW381
SW383 SW384 SW385
(-) (+) ENTER
F-5-101
Chapter 5
[A]
[B]
[1]
5-33