Pioneer SBX-B70D Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Stereo System
  5. SBX-B70D
  6. Operating instructions manual

Pioneer SBX-B70D Operating Instructions Manual

Network speaker base
Hide thumbs
Table of Contents

Advertisement

Quick Links

SBX-B70D
Network Speaker Base
Operating Instructions

Advertisement

Table of Contents
loading

Related Manuals for Pioneer SBX-B70D

Summary of Contents for Pioneer SBX-B70D

  • Page 1 SBX-B70D Network Speaker Base Operating Instructions...
  • Page 2 Store small parts out of the reach of children and the power cord once in a while. When you find it infants. If accidentally swallowed, contact a doctor damaged, ask your nearest PIONEER authorized immediately. service center or your dealer for a replacement.
  • Page 3 (including products supported by this unit). • Pioneer is not responsible for any malfunction of the compatible Pioneer product due to communication error/malfunctions associated with your network connection and/or your connected equipment.

  • Page 4: Table Of Contents

    Thank you for buying this product. Please read through these operating instructions so that you will know how to operate your model properly. After you have finished reading the instructions, put them in a safe place for future reference. Contents 01 Before you start E: Setting the wireless LAN setting for this unit from the web browser of a computer that supports a...
  • Page 5 13 Bluetooth® Audio playback Music playback using Bluetooth wireless technology .40 Remote control operation ..... . .40 Pairing with the unit (Initial registration) ...40 Listen to music on the unit from a Bluetooth capable device .

  • Page 6: Before You Start

    Before you start Chapter 1: Before you start Supplied accessories Operating range of remote control • Remote control x 1 The remote control may not work properly if: • AAA size IEC R03 dry cell batteries x 2 • There are obstacles between the remote control and the •...

  • Page 7: Part Names And Functions

    Part names and functions Chapter 2: Part names and functions Rear panel 1 2 3 4 Movable range of the wireless LAN antenna 105° 105° CAUTION • Do not move the antenna beyond the movable range. Doing so may damage the antenna.

  • Page 8: Remote Control

    Part names and functions  STANDBY/ON Remote control Turns the power of the unit on/off (standby mode) (page 14). SURROUND Switches surround mode (page 15). DIMMER Changes the brightness of the indicators on the front panel of the unit in four steps (page 14). Input selection buttons Switches the input of the unit (page 14).

  • Page 9: Front Panel

    Part names and functions 14 CLK/TIMER 17 VOLUME Use to set the clock and wake-up timer functions (pages 14 Adjusts the overall volume including the subwoofer volume and 15). (page 14). 15 TV CONTROL buttons 18 MUTE These buttons can be used to control TVs (page 46). Temporarily mutes the sound.

  • Page 10: Installing And Connecting The Unit

    Installing and connecting the unit Chapter 3: Installing and connecting the unit Before connecting the unit or changing the connections, be Place the unit. sure to turn off the power and disconnect the power cord from the outlet. Also, make sure you have finished connecting all cables before connecting the power cord to the wall outlet.

  • Page 11: Connecting Antenna

    Installing and connecting the unit Connecting antenna Wire the unit. In order to make the wiring process as easy as possible, Connect the DAB/FM wire antenna into the DAB/FM antenna complete all wiring prior to placing the TV on top of the unit. socket.
  • Page 12 Installing and connecting the unit Connecting using wireless LAN Connecting to the network through the LAN interface or WLAN antenna By connecting this unit to the network via the LAN interface, you can play back audio files stored on components on the Internet network, including your computer, and listen to Internet Radio stations.
  • Page 13 Installing and connecting the unit Place the TV in its final position. CAUTION • Pioneer is not responsible for any accidents or damage that result from improper installation/mounting, incorrect use, modification, disaster, etc. • Place the TV in the center of the unit.

  • Page 14: Getting Started

    Getting started Chapter 4: Getting started To turn the power on General control Press the  STANDBY/ON on the remote control or the /I Input function on the main unit to turn the power on. About startup time: When the INPUT SELECT on main unit is pressed, the current function will change to different mode.

  • Page 15: Sound Controls

    Getting started Bass/treble control Sound controls Press TOOLS on the remote control and then use /// to make adjustments. Surround mode Note When SURROUND is pressed on the remote control the • Adjustments can be made between the range of –5 and current mode setting will be displayed.

  • Page 16: Calling The Wake-Up Timer

    Getting started Calling the wake-up timer An existing timer setting can be reused. Follow steps 1 to 3 in “Setting the wake-up timer”. Press / to select “TIMER ON”, then press ENTER. Cancelling the wake-up timer Turn off the timer setting. Follow steps 1 to 3 in “Setting the wake-up timer”.

  • Page 17: Basic Operation

    Basic operation Chapter 5: Basic operation Outputting the sound of a device Linking power for the unit and a TV connected to the unit If a TV is connected to the unit’s optical digital audio input terminal and the Wake Up TV function is turned ON, then the The following describes the procedure up until listening to the power for the unit will come on when the TV is turned on, and sound of a device connected to the unit.

  • Page 18: Ipod/Iphone Playback

    5G/4G  iPod nano 7G/6G/5G/4G Note • Pioneer does not guarantee that this unit plays iPod/ iPhone models other than the ones specified. • Some functions may be restricted depending on the model or software version. • iPod/iPhone is licensed for reproduction of non- copyrighted materials or materials the user is legally permitted to reproduce.

  • Page 19: Usb Playback

    Repeat play • Pioneer does not guarantee that any file recorded on a USB storage device will play or that power will be Repeat play can play one track, all tracks or a programmed supplied to a USB storage device.

  • Page 20: Connect Network

    Connect network Chapter 8: Connect network Setting with a special application (Start-up Navi) If you have a smart phone or tablet, once you download and start the special application, the settings can be done according to the instructions by the application. •...

  • Page 21: Setting Network Connection

    Connect network Setting network connection This part explains the connection settings for all networks. Connecting this unit and router with a wired LAN Connecting the router with this unit with your iPhone or iPod touch Connecting (iOS version 5.0 or later) this unit and The wireless LAN settings for iPhone or iPod touch can be applied to this unit.

  • Page 22: A: Connecting With A Lan Cable (Wired Lan)

    Connect network A: Connecting with a LAN cable (wired • Proxy Hostname/Proxy Port This setting is required when you connect this unit to the LAN) Internet via a proxy server. Enter the IP address of your Simply connect the LAN cable. Network settings are proxy server in the “Proxy Hostname”...

  • Page 23: B: Setting This Unit With Ios Equipment

    Connect network From the menu on the left, select “Network 10 Enter the address of your proxy server or the Configuration”. domain name. If you wish to change the Friendly Name, select “Friendly 11 Enter the port number of your proxy server. Name”...

  • Page 24: C: Perform This Unit's Settings Using The Ios Equipment (Ios Version 7.1 Or Later)

    Press NETWORK SET UP and VOLUME – on the front panel together for 3 seconds. The unit will enter WAC mode. SBX-B70D ***** WAC (Wireless Accessory Configuration) mode is a mode that allows you to set the network settings by operating this...

  • Page 25: D: Wps Connection Settings

    • When wired LAN is set once, the following procedures 1 through 3 must be executed. XXXXXX Select “Network Type Set” from the HOME SBX-B70D ***** ... MENU. Use / to select “Wireless”. Press ENTER. The home menu will be disabled for about 60 seconds. After 60 seconds, execute the following operation.

  • Page 26: E: Setting The Wireless Lan Setting For This Unit From The Web Browser Of A Computer That Supports A Wired Lan Connection

    Connect network E: Setting the wireless LAN setting for When the NETWORK indicator lights red, this unit from the web browser of a start your computer’s Web browser, and access the URL noted below to make settings for this computer that supports a wired LAN unit.

  • Page 27: F: Setting The Wireless Lan Setting For This Unit From The Web Browser Of A Computer That Supports A Wireless Lan Connection

    Connect network 10 On the “Network Configuration”, input the 16 When settings are completed, click on router's SSID, then select the “Security” item set “Apply”. The unit will automatically power down. on the router. 17 Disconnect the LAN cable from the unit and 11 If a password is requested, input it here.

  • Page 28: G: Directly Connecting This Unit With A Smart Phone By Wireless (Wireless Direct)

    (Wireless computer. Direct) [Pioneer Setup:xxxxxxxx] will be shown in the SSID field. • When wired LAN is set once, the following procedures 1 “xxxxxxxx” represents a number unique to each product. through 3 must be executed.

  • Page 29: Checking The Network Information

    Connect network Checking the Network Information The setting status of the following network-related items can be checked. • Signal Strength – Check the strength of the wireless signal. • IP Address – Check the IP address of this unit. • MAC Address – Check the MAC address of this unit. •...

  • Page 30: Listening To Spotify Audio Streaming Playback

    Listening to Spotify audio streaming playback Chapter 9: Listening to Spotify audio streaming playback In order to use the Spotify audio stream playback function from the Spotify About the Spotify audio streaming application playback function To use the Spotify audio stream playback function, select this Spotify is a music streaming distribution service managed unit on the Spotify application.

  • Page 31: Installing Controlapp

    Listening to Spotify audio streaming playback Installing ControlApp The Pioneer application ControlApp must be installed on your mobile device. For more information about your operating environment, access the appropriate Website as noted below. If using an iPhone or iPod touch You can obtain from “App Store”.

  • Page 32: Music Server

    Chapter 10: Music server About playable DLNA network devices Installation of the Pioneer Control Application (ControlApp) is required in order to use all of the Music server functions. This unit allows you to play music on media servers Consult the following website: connected on an identical Local Area Network (LAN) as the unit.

  • Page 33: Airplay

    AirPlay Chapter 11: AirPlay Operating AirPlay from an iPod/iPhone/ iPad Using AirPlay on iPod touch, iPhone, iPad and iTunes Set the iPhone, iPod touch or iPad to music AirPlay works with iPhone, iPad and iPod touch with iOS 4.3.3 playback mode. or later, and Mac and PC with iTunes 10.2.2 or later.
  • Page 34 AirPlay Tap (touch) AirPlay. Once the name of this unit is displayed, select it. SBX-B70D ***** Note • “*****” is the lower three bytes of the MAC address. Select a track and play it. Swipe (slide) and hide display of the Control Center.

  • Page 35: Using The Tuner

    Using the tuner Chapter 12: Using the tuner Improving poor FM reception: Listening to the radio broadcasts Press AUDIO repeatedly to select MONO. The following steps show you how to tune in to FM radio This will change the tuner from stereo to mono and usually broadcasts using the automatic (search) and manual (step) improve the reception.

  • Page 36: To Recall A Memorized Station

    Using the tuner To recall a memorized station Auto Scan Press PRESET / to select the desired station. To scan the preset stations The stations saved in the memory can be scanned automatically. (Preset memory scan) Press and hold PRESET /. The preset number will appear and the programmed stations will be tuned in sequentially, for 5 seconds each.

  • Page 37: Manual Tune

    Using the tuner Manual tune Within 10 seconds, press the PRESET / to select the preset channel number. You can manually store stations which Auto Scan cannot Store the stations in memory, in order, starting with preset find. If reception is poor, you can adjust the sensitivity. channel 1.

  • Page 38: Using The Radio Data System (Rds)

    Using the tuner While the selected program type is Using the Radio Data System (RDS) displayed (within 6 seconds), press RDS PTY again. After the selected program type has been lit for 2 seconds, An introduction to RDS “SEARCH” will appear, and the search operation will start. Radio Data System (RDS) is a system used by most FM radio stations to provide listeners with various kinds of Note...

  • Page 39: Using The Auto Station Program Memory (Aspm)

    Using the tuner Using the Auto Station Program Notes for radio text: • The first 8 characters of the radio text will appear and Memory (ASPM) then they will scroll across the display. While in the ASPM operation mode, the tuner will •...

  • Page 40: Bluetooth® Audio Playback

    A2DP profiles. pairing procedure on it. • Pioneer does not guarantee proper connection and Pairing will start. operation of this unit with all Bluetooth wireless • Place the Bluetooth capable device close to the unit.

  • Page 41: Listen To Music On The Unit From A Bluetooth Capable Device

    Bluetooth® Audio playback Confirm on the Bluetooth capable device Connection while in BT STANDBY mode with Bluetooth capable device that pairing has been completed. If pairing with the Bluetooth capable device has been When connection history (pairing has already been completed correctly, the name of the Bluetooth capable conducted) with a Bluetooth capable device exists for the unit device will be displayed on the front panel of the unit.

  • Page 42: Phase Control Technology

    PHASE CONTROL The phase indicates the time relationship between two sound technology concept developed by PIONEER. waves. Two sounds waves are said to be "in phase" if their peaks match up with each other, and the phases are said to be "out of phase"...

  • Page 43: Home Menu

    USB memory device, delete them. http://www.pioneerelectronics.com then press ENTER. • If an update file does not exist in the Pioneer’s website, Press / to select “ON“ or “OFF“, then updating the software for the unit is not necessary.

  • Page 44: Firmware Update Using Web Browser

    If you wish to update, use / to select product being used. “OK“ and then press ENTER. SBX-B70D ***** will be displayed. (“*****” is the lower The updating screen appears and updating is performed. three bytes of the MAC address.) •...
  • Page 45 “The upload process finished successfully.” will be shown when the update is completed. After the update is complete, the power will turn off automatically. SBX-B70D ****** Press Start. The firmware update prepare screen is displayed. If the screen does not switch automatically, click Click here.

  • Page 46: Setting The Remote To Control Other Components

    Setting the remote to control other components Chapter 16: Setting the remote to control other components Recall signal from the remote Delete a preset code control of another device to the Hold down SHIFT and then press either TV remote control of this unit or BD.

  • Page 47: Control Of Other Devices

    Setting the remote to control other components Control of other devices • Performing the following controls via remote control requires that you first register the remote control code of the device that you wish to control. For more details see Recall signal from the remote control of another device to the remote control of this unit on page 46.

  • Page 48: Troubleshooting And Other Information

    Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used. If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work. General problem...
  • Page 49 Troubleshooting and other information When a USB storage device is connected Problem Check Remedy USB storage device is not Is the USB storage device properly Connect the device securely (all the way in). recognized. connected? Is the USB storage device connected This unit does not support USB hubs.
  • Page 50 Troubleshooting and other information Network Problem Check Remedy Cannot access to the The LAN cable is not firmly Firmly connect the LAN cable (page 12). network. connected. The router is not switched on. Switch on the router. Is the network type correctly set up? If set to Auto, the network connection is switched to wired or wireless depending on whether the unit is connected to a LAN cable when the power is turned ON.
  • Page 51 Troubleshooting and other information Problem Check Remedy Cannot access Windows In case of Windows Media Player 11: Instead of logging onto the domain, log onto the local machine. Media Player 11 or Windows You are currently logged onto the Media Player 12. domain through your PC with Windows XP or Windows Vista installed.
  • Page 52 Troubleshooting and other information Wireless LAN Problem Check Remedy Network cannot be accessed Is the LAN cable connected to the Be sure the LAN cable is not connected to the unit, and then the via wireless LAN. unit? unit OFF and ON again. Is the Network type set to Wired? In the Network configuration screen in the Web browser, set Network type to Auto.

  • Page 53: About Network Playback

    DLNA Interoperability Guidelines. This network connection may be blocked. unit complies with DLNA Interoperability Guidelines v1.5. Pioneer is not responsible for any malfunction of the player When a computer running DLNA server software or other and/or the Music Server features due to communication...

  • Page 54: Authorizing This Unit

    Troubleshooting and other information Authorizing this unit In order to be able to play with Music Server, this unit must be authorized. This happens automatically when the unit makes a connection over the network to the computer. If not, please authorize this unit manually on the computer.

  • Page 55: Radio Wave Caution

    Troubleshooting and other information Radio wave caution Scope of operation This unit uses a 2.4 GHz radio wave frequency, which is a Use of this unit is limited to home use. (Transmission band used by other wireless systems (see list below). To distances may be reduced depending on communication prevent noise or interrupted communication, do not use this environment).

  • Page 56: Supported Audio File Formats

    Troubleshooting and other information Supported audio file formats This unit supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats. Also, the compatibility of file formats varies depending on the type of server. Check with your server to ensure the compatibility of file formats supported by your server.
  • Page 57 32 kHz, 176.4 kHz and 192 kHz support 2-channel audio sources only. c Files encoded using Windows Media Codec 9 may be playable but some parts of the specification are not supported; specifically, Pro, Lossless, Voice. d Uncompressed FLAC files are not supported. Pioneer does not guarantee playback.

  • Page 58: About Wi-Fi

    Troubleshooting and other information Dolby Digital ® About Wi-Fi Manufactured under license from Dolby Laboratories. Dolby The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi and the double-D symbol are trademarks of Dolby Alliance. Laboratories. Please see the Dolby Laboratories website for more details. About iPod/iPhone/iPad For DTS patents, see http://patents.dts.com.

  • Page 59: Specifications

    Troubleshooting and other information • Accessories Specifications Remote control........1 AAA size IEC R03 dry cell batteries .

  • Page 60: Preset Code List

    Presetting the following manufacturer codes to the remote control for this unit will allow this unit’s remote control to control other devices. Key: Manufacturer / Code Pioneer 0113, 0233, 0252, Asuka 0140, 0141, 0143, 0228, Casio 0221 Dixi 0142, 0149, 0152, 0154,...
  • Page 61 Preset code list Flint 0149, 0155 HiLine 0155 Kingsley 0141, 0228 Memphis 0142, 0154 Formenti 0132, 0138, 0139, Hinari 0142, 0143, 0147, 0149, Kneissel 0125, 0133, 0155 Mercury 0154, 0155 0141, 0152, 0228 Kolster 0149, 0155 Metz 0138, 0299, 0300, 0301, 0152, 0154, 0155 Formenti/Phoenix 0228 Hisawa 0143, 0151, 0156...
  • Page 62 Preset code list Palladium 0125, 0141, 0150, Reflex 0155 Sonolor 0146, 0156 Thomson 0121, 0122, 0141, 0155, 0229 Revox 0125, 0149, 0152, 0155 Sontec 0125, 0149, 0152, 0155 0148, 0149, 0153, 0155, 0157, Palsonic 0229 0159, 0210 Rex 0140, 0145, 0146 Sony 0116, 0118, 0142, 0147, Panama 0140, 0141, 0142, RFT 0125, 0133, 0138...

  • Page 63: Dvd

    Preset code list If operations are not possible using the preset codes below, you may be able to conduct operations with the preset codes for the Pioneer 2014 Eclipse 2180 Micromaxx 2097 Scott 2120, 2187 AEG 2188 Electrohome 2188 Microstar 2097...
  • Page 64 Preset code list If operations are not possible using the preset codes below, you may be able to conduct operations with the preset codes for the DVD. Pioneer 2034, 2192, 2255, JVC 2290, 2291, 2293, 2294, Onkyo 2289 Sony 2283, 2284, 2285, 2292...
  • Page 66 Indoor use only English: Dansk: Hereby, Pioneer, declares that this Undertegnede Pioneer erklærer herved, SBX-B70D is in compliance with the at følgende udstyr SBX-B70D essential requirements and other overholder de væsentlige krav og øvrige relevant provisions of Directive relevante krav i direktiv 1999/5/EF 1999/5/EC.
  • Page 67 Português: Pioneer declara que este SBX-B70D Pioneer izjavlja, da je ta SBX-B70D v está conforme com os requisitos skladu z bistvenimi zahtevami in essenciais e outras disposições da ostalimi relevantnimi določili direktive Directiva 1999/5/CE. 1999/5/ES. Pioneer tímto prohlašuje, že tento Prin prezenta, Pioneer declara ca acest SBX-B70D je ve shodě...
  • Page 68 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. 5 Arco Lane, Heatherton, Victoria, 3202, Australia, TEL: (03) 9586-6300 PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. Blvd.Manuel Avila Camacho 138 10 piso Col.Lomas de Chapultepec, Mexico, D.F. 11000 TEL: 55-9178-4270 K002_B3_En <YOM200167-0003>...

Table of Contents