Pioneer S-DV77SW Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Stereo System
  5. S-DV77SW
  6. Operating instructions manual

Pioneer S-DV77SW Operating Instructions Manual

Dvd/cd tuner, powered subwoofer and satellite speaker
Hide thumbs Also See for S-DV77SW:
Table of Contents

Advertisement

Quick Links

XV-DV77
POWERED SUBWOOFER
S-DV77SW
SATELLITE SPEAKER
S-DV77ST

Advertisement

Table of Contents
loading

Related Manuals for Pioneer S-DV77SW

Summary of Contents for Pioneer S-DV77SW

  • Page 1 XV-DV77 POWERED SUBWOOFER S-DV77SW SATELLITE SPEAKER S-DV77ST...
  • Page 2 Thank you for buying this PIONEER product. Please read through these operating instructions so you will know how to operate your model properly. After you have finished reading the instructions, put them away in a safe place for future reference.

  • Page 3: Installation Precautions

    A damaged power cord can cause a STOP fire or give you an electrical shock. Check the power cord once in a while. When you find it damaged, ask your nearest PIONEER authorized service center or your dealer for a replacement. 110 V...
  • Page 4 下列標記可在DVD/CD調諧器的後面板及有源副 低音揚聲器的後面板上找到。 感謝惠購本PIONEER產品。 請通讀本使用說明書，以便了解如何正確操作本機。通 讀完畢後，請妥善保存，以備日後參考。 使用本產品時，請遵照本機下方關於XV-DV77的指示進 行操作。 小心 本產品含有大於1級的鐳射二極管。為確保安全，請勿 H017BChH 拆卸任何蓋板或試圖對機器內部進行操作。 所有維修工作均應交由專業人員進行。 本播放機具有下列注意標籤。 位置：XV-DV77底部 CLASS 1 LASER PRODUCT XV-DV77機罩內 CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN. AVOID EXPOSURE TO BEAM. SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG, WENNABDECKUNG GEÖFFNET VORSICHT : NICHT DEM STRAHL AUSSETZEN! SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ...
  • Page 5 安裝注意事項 ÷ 安裝各設備組件時，請注意在其上方或左右兩側及 通風孔附近不得放置物品。並且如圖所示應放置於 距離牆壁5厘米處。各設備下部均有通風孔，因此 請勿將它們安裝在厚絨地毯或其他可能引起堵塞的 表面上。 ÷ 請定期使用真空吸塵器清理副低音揚聲器端口，以 免積塵。 有源副低音揚聲器（S-DV77SW） 5厘米以上 DVD/CD調諧器（XV-DV77） 5厘米以上 15厘米以上 PLAY/PAUSE STANDBY/ON 線路電壓選擇開關(僅限多電壓機型) 線路電壓選擇開關位於本機的背面板上。在將電源線 插頭插入電源插座之前，請確認設定是否正確。如果 電壓沒有正確設定，或搬遷到電壓需求不同的地方， 5厘米以上 請按如下要領調整本選擇開關 ﹕ ¶ 進行本調整之前， 必須從電源插座拔除電源線。 ¶ 使用中型（扁頭）螺絲刀。將螺絲刀的尖頭插入選擇 開關的槽中並轉動以使貴地電源電壓標記指向箭 頭。 5厘米 OPEN/CLOSE 以上 STOP 電源電壓的工廠初期設定為220∼230 V。如果貴地電壓不 同，請改變電壓選擇開關的設定。 電源線注意事項 處理電源線時請手持插頭。插拔插頭時請勿拉扯電...

  • Page 6: Table Of Contents

    En/ChH 目錄 1 開始使用之前 特點 ... 9 使用本說明書 ... 9 安裝提示 ... 10 避免因結露而引發問題 ... 10 搬移本系統 ... 10 與本系統相容的碟片 ... 11 DVD影碟的地區 ... 11 2 控制按鈕和顯示屏 前面板 ... 13 顯示屏 ... 13 遙控器 ... 15 3 設置 簡介 ... 16 打開電源和設置時鐘...
  • Page 7 重複播放碟片中的某一片段 ... 46 在碟片某處製作書籤 ... 47 記憶碟片設置 ... 47 顯示碟片資訊 ... 48 播放中的顯示 ... 49 停止時的顯示 ... 51 DVD和CD系統顯示 ... 51 播放時的顯示 ... 51 停止時的顯示 ... 51 7 播放MP3 播放MP3 ... 52 搜索檔案夾和曲目 ... 53 使用隨機播放 ... 53 使用重複播放 ... 54 顯示MP3資訊...
  • Page 8 For instructions on connecting up the speakers and the powered subwoofer, see the separate instruction sheet, Setting Up the System. En/ChH 家長鎖定) ... 77 登錄新密碼 ... 78 更改密碼 ... 78 設置/更改 等級 ... 79 設置/更改 ... 79 國家代碼列表 ... 80 11 連接...

  • Page 9: 開始使用之前

    ÷ The XV-DV77 delivers breathtaking sound quality with Dolby Digital and DTS discs, and is also compatible with 96kHz/24-bit PCM sources. ÷ This high-quality digital video filter gives you great picture quality with DVD discs. The filter is effective all the way up the video frequency range, and also reduces noise outside the video frequency range.

  • Page 10: 安裝提示

    We want you to enjoy using this unit for years to come, so please bear in mind the following points when choosing a suitable location for it:  Use in a well-ventilated room.  Place on a solid, flat, level surface, such as a table, shelf or stereo rack.

  • Page 11: 與本系統相容的碟片

    Any disc that displays one of the following logos should play in this system. Other formats, including DVD-RAM, DVD- ROM, DVD-Audio, SACD Photo CD and CD-ROM (except those containing MP3 files) will not play. • Logo: • Single-sided or double-sided discs •...
  • Page 12 PLAY/PAUSE STANDBY/ON COND.LAST 96KHz Timer – pages 58-61 Wake up timer page 58 Character display – page 40 # Lights when a disc is playing Multi-angle scene – page 42 Sleep timer – page 60 Lights when playing a DVD with DTS sound Condition memory –...

  • Page 13: 控制按鈕和顯示屏

    前面板 PLAY/PAUSE STANDBY/ON 顯示屏 COND.LAST 96KHz 定時器－參見第58-61頁 喚醒定時器－參見第58頁 字符顯示區 -DSP -－參見第40頁 # 碟片播放時亮起 多角度場景－參見第42頁 睡眠定時器－參見第60頁 播放DTS音響類DVD時亮起 COND. 條件記憶－參見第47頁 LAST 最後記憶－參見第47頁 96kHz 播放96kHz音頻的碟片時亮起 控制按鈕和顯示屏 OPEN/CLOSE RPT–1 PGM RDM 當前聲道指示燈 播放杜比Pro Logic音響時亮起 表示廣播信號的強度 自動立體聲/單聲道模式－參見第32頁 重複播放模式－ 參見第46，54頁 編序播放－參見第43，56頁 隨機播放－參見第45，53頁 播放杜比數碼音音響時亮起 STOP -DSP- PRO LOGIC DIGITAL...
  • Page 14 STANDBY SYSTEM TUNER FM/AM DIRECT PLAY 3 V1/V2/V3 – VIDEO TAPE TEST MEMORY SEARCH TONE CONDITION LAST REPEAT A–B RANDOM >10 DIMMER PROGRAM 10/0 TOP MENU SYSTEM MENU SETUP ENTER ∞ RETURN SOUND SYSTEM MENU DISP CHARACTER e STEP/SLOW E FOLDER/GROUP ¡...

  • Page 15: 遙控器

    遙控器 STANDBY SYSTEM TUNER FM/AM DIRECT PLAY 3 V1/V2/V3 – VIDEO TAPE TEST MEMORY SEARCH TONE CONDITION LAST REPEAT A–B RANDOM >10 DIMMER PROGRAM 10/0 TOP MENU SYSTEM MENU SETUP ENTER ∞ RETURN SOUND SYSTEM MENU DISP CHARACTER e STEP/SLOW E FOLDER/GROUP ¡...

  • Page 16: 設置

    STANDBY ENTER ∞ SYSTEM MENU CLOCK/ TIMER En/ChH Before starting, make sure that your system is installed and set up according to the Setting up the system guide, and plugged into a power outlet. This chapter covers switching on and setting the clock, using the Setup Navigator to set some basic preferences, using all the basic controls for playing...

  • Page 17: 更改時鐘顯示格式

    ∞ • The default clock display format is 12-hour. ∞ The display blinks for 2 seconds to indicate that the time has been set. Press anytime to see the clock when the system is on or in standby. You can choose to display the clock and timer settings in 12-hour (default setting) or 24-hour format.

  • Page 18: 設置環繞聲

    These include setting the distances from your listening position to your speakers, and balancing the speaker volumes. Unless you change the layout of your speakers or main listening position, you only need to make these settings once.

  • Page 19: System Setup

    System Setup menu to further enhance the surround sound. See chapter 10 for more on this. • The speaker distance settings have no effect when the surround mode is set to . See chapter 5 for more on surround modes.

  • Page 20: 環繞聲的平衡

    To help you judge the sound level of each speaker a test tone is played through each speaker in turn (make sure that there are no headphones connected). Adjust the levels until they all sound equal.

  • Page 21: 設置電視制式

    ∞ Lch + 3dB For best results, sit in your main listening position when doing this. You can adjust each speaker in the range of +/-10dB. The default setting of this player is you notice that the picture is distorted when playing...

  • Page 22: 使用設置嚮導

    STANDBY SETUP ENTER ∞ En/ChH Before playing any discs, we strongly recommend using the Setup Navigator. This makes some basic DVD system settings for you. Also turn on your TV and make sure that it is set to the correct video input. •...
  • Page 23 • Press to select the highlighted option. • If you decide you don’t want to use the Setup Navigator, select here instead. Audio Video1 V2 Language General Setup Navigator English français Language Deutsch OSD Language Italiano Español Select the On Screen Language Exit Move ENTER...

  • Page 24: 設置遙控器，使其可控制電視機

    You can set up the supplied remote to control your TV. 10/0 See the code list on the following page. Next to each manufacturer is one or more three-digit codes. These tell the remote what kind of TV you have. •...

  • Page 25: 使用遙控器控制電視機

    The table below shows the TV controls available from this remote for Europe. 製造商 編碼 設置 使用遙控器控制電視機 下表顯示了適用歐洲的用遙控器控制電視機的方 法。 按鈕 功能 按該鈕打開電視機或進入待機狀態 按該鈕更換電視頻道 按該鈕調節電視機的音量 按該鈕選擇電視機的輸入模式為內置電視 調諧器還是外接視頻源。 編碼...
  • Page 26 設置 製造商 編碼 製造商 編碼...

  • Page 27: 開始使用

    STANDBY DIRECT PLAY 3 The basic controls for playing discs are covered here. Further functions are detailed in the next chapter. >10 10/0 TOP MENU MENU ENTER ∞ RETURN e STEP/SLOW E ¡ ¢ Load a disc with the label side facing up, using the disc tray guide to align the disc (if you’re loading a double- SHIFT...

  • Page 28: 基本播放控制

    ¡ ¢ 開始使用 基本播放控制 按鈕 功能 開始播放碟片或暫停播放碟片（再按可 重新開始播放）。僅用於DVD和VCD：使 已停止播放的碟片恢復播放。 停止播放。僅用於DVD和VCD：顯示屏顯 示 重新開始播放）。 1. 按住該鈕不放，可快速向後掃描。釋 放後可恢復正常播放。 2. 按一次開始向後掃描。再按一次可加 快掃描速度。（CD和VCD有兩種掃描速 度；DVD有三種。）按 6 恢復正常播 放。 ¡ 1. 按住該鈕不放，可快速向前掃描。釋 放後可恢復正常播放。 2. 按一次開始向前掃描。再按一次可加 快掃描速度。（CD和VCD有兩種掃描速 度；DVD有三種。）按 6 恢復正常播 放。 跳至當前軌跡或章的開始處，再按則依 次向前跳躍。 ¢ 跳至下一軌跡或章。 數字鈕 如果碟片已停止播放，則從選定的軌跡 或標題號開始播放。如果碟片正在播 放，則跳至選定的軌跡或章號的開始處...

  • Page 29: Dvd碟片選單導向

    ¡ While using the DVD playback controls, you may see the mark displayed on-screen. means that the operation is not allowed by the system. means that the operation is not allowed by the disc. Many DVD discs contain menus. Sometimes these are displayed automatically when you start playback;...

  • Page 30: Vcd Pbc選單導向

    Some Video CDs have menus from which you can choose what you want to watch. These are called PBC (Playback control) menus. You can play a PBC Video CD without having to navigate the PBC menu by starting playback using a number button to select a track, rather than the 6 button.

  • Page 31: 收聽收音機

    TUNER The following steps show you how to FM/AM DIRECT PLAY 3 tune in to FM and AM radio broadcasts using the automatic, manual and high-speed tuning functions. Once you are tuned to a station you can memorize the frequency for recall later—see Saving station presets on the following page for how to do this.

  • Page 32: 改善Fm立體聲收音效果

    If you’re listening to a stereo FM broadcast, but find that there is a lot of noise because of a weak signal, try switching to mono. TUNER MENU • Change menu options using the 2 and 3 buttons. Press to select the currently displayed option. FM AUTO/MONO •...

  • Page 33: 收聽預設電台

    TUNER MENU • Change menu options using the 2 and 3 buttons. Press to select the currently displayed option. STATION MEMORY • Change menu options using the 2 and 3 buttons. Press to select the currently displayed option. ∞ ST 1 FM 87.5O ST 3 FM 87.5O...

  • Page 34: 命名預設電台

    For easier identification, you can name your station presets. See Listening to station presets on the previous page for how to do this. TUNER MENU • Change menu options using the 2 and 3 buttons. Press to select the currently displayed option. STATION NAME •...

  • Page 35: 調諧器系統顯示

    87.5OMHz 7:36 You may have connected various other components to your system using the analog or digital auxiliary inputs. • Change menu options using the 2 and 3 buttons. Press to select the currently displayed option. ∞ • • 開始使用 調諧器系統顯示...

  • Page 36: 降低輔助輸入電平

    STANDBY • For detailed instructions on using DIRECT PLAY 3 V1/V2/V3 the optional MD or tape deck, see the VIDEO TAPE included operating instructions. • For more on controlling your TV using this remote control, see page 25. ENTER If a component you connected to an ∞...

  • Page 37: 使用音場模式和效果

    This menu gives you access to various amplifier sound settings: The bass and treble settings have no effect when using the DSP modes, or when the Surround mode is set to anything other than • BASS Adjusts the level of bass. •...

  • Page 38: 使用音場模式

    This system offers several ways to enjoy surround sound and stereo sources. When playing Dolby Digital, Dolby Surround, Dolby Pro-Logic or DTS sources, we recom- mend using the surround mode to ensure proper surround sound. From the surround mode you can choose one of the Advanced Theater effects to add room- type effects to the source.
  • Page 39 • STANDARD , except that 2-channel (analog or digital) sources are processed using Dolby Pro Logic for surround-sound effects. • MUSICAL Concert hall sound. • DRAMA Classic, mid-size movie theater sound. • ACTION Large, modern movie theater sound. • VIRTUAL SURR.1 Virtual surround sound from just the main front stereo speakers and the subwoofer.

  • Page 40: 使用Dsp效果播放其他立體聲音源

    You can add room effects to audio CDs and other stereo sources using the DSP modes. Different effects work better with different kinds of music, so don’t be afraid to experiment a little. • The DSP effects cannot be used with 96kHz/24-bit sources, or in combination with a surround mode.

  • Page 41: 播放碟片

    • Most of the functions covered in this chapter apply to DVD discs, Video CDs and CDs, although the exact operation of some varies slightly with the kind of disc loaded. • When playing DVD discs, if the appears on-screen when you try and use a particular function, either the player or the disc doesn’t allow the use of that function.

  • Page 42: 轉換攝影角度

    Some DVD discs feature scenes shot from two or more angles—check the disc box for details: it should be marked with a icon if it contains multi-angle scenes. If the disc was paused, playback starts again with the new angle. •...

  • Page 43: 轉換聲道

    For karaoke or similar format CDs and Video CDs, it’s possible to select stereo, left channel only, or right channel only. Press repeatedly to switch between: • – Left channel only • – Right channel only • Making a program list means telling the player which titles/chapters/tracks you want played, and the order to play them in.
  • Page 44 For titles/chapters 1–10, use the corresponding number buttons. For 11 and over, use the for 24, etc.) • A program list can contain up to 24 steps. ∞ If you do this, the program list is automatically recalled when you next load the disc. •...

  • Page 45: 使用隨機播放

    • You can't start playback later with a PBC Video CD; or 6 to start. press Use the random play function to play titles/chapters (on a DVD) or tracks (on a CD or Video CD) in a random order. The mode is displayed on-screen and in the front panel display: •...

  • Page 46: 使用重複播放

    You can set the player to repeat individual tracks on CDs or Video-CDs, chapters or titles on DVD discs, or the whole disc. It's also possible to loop a section of a disc. You can use the repeat together with the programming mode to repeat the tracks/chapters in the program list (see page 43 for how to make a program list).

  • Page 47: 在碟片某處製作書籤

    If you watch only part of a DVD disc with the intention of picking up later where you left off, you can bookmark the place then resume playback at a later date without having to manually search for the right place. You can use this feature for up to five discs (after that the oldest bookmark is deleted to make space for a new one).

  • Page 48: 顯示碟片資訊

    another replaces the oldest one stored. The settings memorized are: • (page 72) • • (page 72) • (page 72) • The display shows appears on-screen. • To clear memorized settings, load the disc and press while Various track, chapter and title information, as well as the video transmission rate for DVD discs, can be displayed on-screen while a disc is playing, or while it’s stopped.

  • Page 49: 播放中的顯示

    current title/chapter number elapsed time of current title Play 3–29 49.58 Title –51.06 / 101.04 remaining time of current title remaining total time of current title « current title/chapter number elapsed time of current title Play 3–32 54.53 Chapter 0.21 / 1.51 elapsed time of current chapter total time of current...
  • Page 50 current track number/ total number of tracks Video CD's total elapsed time Play 3/12 10.53 –59.26 / 70.19 Video CD's remaining time Video CD's total time « current track number Video CD's total elapsed time Play 10.53 Track 3.56/ 5.23 elapsed time of current track total time of current tracks «...

  • Page 51: 停止時的顯示

    Information: DVD Title Chapter Title Chapter 1~ 1 1~ 1 1~ 1 1~ 1 1~ 1 1~ 1 1~ 1 1~ 4 1~ 1 Exit DISPLAY Information: Compact Disc Total Time 6.30 Track Time 3.32 2.58 Exit DISPLAY O:24 Elapsed track time 4:12 Time CD mode...

  • Page 52: 播放Mp3

    This system can play MP3 files on a CD-ROM disc. MP3 is a popular audio format on computers and the Internet. Even with file sizes one-tenth the size of CD audio, the sound quality remains reasonable. • It may take upwards of 20 seconds for the system to read the contents of the disc.

  • Page 53: 搜索檔案夾和曲目

    4 ¢ The folder number is shown in the display. For numbers 1-9, press the corresponding number button. For numbers 10-99, press , then enter the number. For numbers 100 and over, press then enter the number. For example, for track 46, press , , .

  • Page 54: 使用重複播放

    Use the repeat play feature to repeat the current track, or all the tracks on the disc. Each press changes the repeat play mode: • Repeat track (the • Repeat folder (the • Repeat disc (the indicator lights) • Repeat off If you stop playback or open the disc tray, repeat play is also canceled.

  • Page 55: 使用Mp3嚮導

    Use the MP3 Navigator to make searching for the track (s) you want to play easier. You can also use it to add or clear tracks from the program list. Total number of tracks Current : 3 1-1 Current : 3 1-1 MP3 Navigator Folder Track...

  • Page 56: 製作Mp3曲目的編序列表

    MP3 Program Folder:001~025 – – – – – : – – – – – ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— ——:—— Move ENTER Play PROGRAM From this screen you can enter folder and track numbers directly to build up a program list.

  • Page 57: Mp3相容資訊

    • Mono or stereo MPEG-1 Audio Layer 3 format compatible. • The CD-ROM must be ISO 9660 compatible. • MP3 tracks on mixed CD audio/MP3 discs can’t be played. Only the audio section is playable. • This system is not compatible with multi-session discs.

  • Page 58: 使用定時器

    You can use the timer as an alarm clock to wake up to the sound of a disc loaded, the radio, or the optional tape or MD deck. If you have an external component operated by a separate timer, you can also set the source function to that.

  • Page 59: 啟動/關閉喚醒定時器

    OFF 1O:3O Set in the same way as the switch on time, pressing to finish. The display shows the timer settings: TIMER CHECK 9:3O OFF 1O:3O DVD/CD VOLUME CHECK END The timer will not work if the system is left on! The standby light on the front panel lights green to indicate that the timer has been set.

  • Page 60: 檢查定時器設置

    If you’ve set the wake-up timer, you can check the settings while the system is in standby. The display shows the timer settings: TIMER CHECK 9:3O OFF 1O:3O DVD/CD VOLUME CHECK END The sleep timer switches the system into standby after a specified amount of time so that you can fall asleep without worrying about the stereo being left on all night.
  • Page 61 ∞ • SLEEP AUTO Switch off after the CD has played out * • SLEEP Switch off after 90 minutes • SLEEP Switch off after 60 minutes • SLEEP Switch off after 30 minutes • SLEEP Cancels the sleep timer The sleep timer indicator ( ) lights when the sleep timer is active.

  • Page 62: 高級音聲設置

    The dynamic range of a source is the difference between the quietest and the loudest sounds. The dynamic range of Dolby Digital soundtracks can be very great. This makes them exciting, but it also means that when you turn the volume down you can easily lose quiet dialog. Switch on Dynamic Range Control to even out the soundtrack volume.

  • Page 63: 雙重單聲道設置

    (the left channel is played through the left speaker; the right through the right) • The left channel is played through the center speaker (or through the left and right speakers if is selected); the right channel is muted.

  • Page 64: 調整聲道的音量級

    ∞ Lch + 3dB For best results, sit in your main listening position when doing this. You can adjust each speaker in the range of +/-10dB. • If you don’t press exited anyway after about 20 seconds. En/ChH 高級音聲設置...

  • Page 65: 使用Dvd設置選單

    The DVD Setup menu gives you access to all the system’s DVD settings. Press to display/leave the menu and the cursor (25∞3) and on the remote to navigate and select options. In some screens you can press to leave the screen without making any changes.

  • Page 66: 音頻設置

    • Default: Audio V2 Language Video1 General — Dolby Digital Dolby Digital Out Dolby Digital 3 PCM — 96kHz PCM Out Changes Dolby Digital output mode Move SETUP You only need to make this setting if you connected this system to another component (AV amplifier, etc.) using the optical digital out.

  • Page 67: 視頻設置

    • Set in Setup Navigator (Default: Audio Video1 V2 Language General TV Screen — 4:3 (Letter Box) 4:3 (Pan & Scan) 16:9 (Wide) Select your display preference Move SETUP If you have a widescreen TV, select the setting—widescreen DVD software is then shown using the full screen area.

  • Page 68: (螢幕保護程式)

    • Default setting: Audio Video2 Language General Background — Pioneer Logo Video Adjust Black Put Background Selections Move SETUP This specifies what the screen shows when the player is stopped. Audio...

  • Page 69: 選擇預設置

    • – Default setting; no effect added • – High contrast picture • – Picture with rich color • – User presets (see below for more on these) You can highlight a preset while a disc is playing (before you press to select it) to see the effect on the picture immediately.

  • Page 70: 創建自己的設置（2

    • – Adjusts the sharpness of the mid- frequency (less detailed) elements in the picture. (This setting is only effective when • – Adjusts how saturated colours appear. • – Adjusts the overall colour balance between red and green. Video Memory Select Video Setup ∞...

  • Page 71: (定格影像)

    • Default setting: Audio Video2 Language General Background Color Pioneer Logo — Video Adjust Still Picture Field — On Screen Display Frame — Angle Indicator — Auto Move SETUP The player uses one of two processes when displaying a still frame from a DVD disc. The default Auto setting lets the system decide which to use.

  • Page 72: (角度指示符)

    • Default setting: Audio Video2 Language General Background Color — Pioneer Logo Video Adjust Still Picture Auto — On Screen Display Position - Normal — Angle Indicator — Move SETUP If you prefer not to see the camera icon on-screen...

  • Page 73: (字幕語言)

    This setting is your preferred audio language for DVD discs. If the language you specify here is recorded on a disc, the system automatically plays the disc in that language (although this depends on the Auto Lan- guage setting—see Auto Language on page 74). Audio Video1 Language General...

  • Page 74: (自動語言)

    Audio Video1 Language General Subtitle Language Code (0~2) List of Languages ja: Japanese Setup audio language +/– RETURN Return Move Select Exit ENTER SETUP The DVD format recognizes 136 different languages. Choose if you want to specify a language other than those listed, then follow the on-screen display to select a language.

  • Page 75: (Dvd語言)

    You can still switch audio and subtitle languages on playback using the • Default Setting: Audio Video1 Language General OSD Language – English w/ Subtitle Language Audio Language – English English Subtitle Language Japanese French Auto Language - On German DVD Language English Italian Subtitle Display - On...

  • Page 76: (字幕顯示)

    • Default Setting: Audio Video1 Language General OSD Language – English Audio Language – English Subtitle Language – English Auto Language – On DVD Language - English Subtitle Display On Assist Subtitle Subtitle Off - Selected Subtitle Exit Move SETUP Set to , the player displays subtitles according to the Subtitle Language and Auto Language settings above.

  • Page 77: 一般設置

    • Default setting: Audio Video1 V2 Language General Setup Menu Mode Expert — Setup Navigator — Basic Parental Lock Off (us) — Change menu mode Move SETUP setup menu gives you access to the more commonly used settings. It also features an information bar which tells you more about what the currently highlighted option means.

  • Page 78: 登錄新密碼

    Before you can set the Parental Lock level or the Country Code you must register a password. As the password owner, you can change the Parental Lock level or Country Code whenever you like. You can also change the password. Not all discs that you may consider inappropriate for your children are rated.

  • Page 79: 設置/更改 等級

    Move leftward to lock more levels (more discs will require the password); rightward to unlock levels. You can’t lock level 1. Use the Condition Memory feature (page 48) to save the Parental Lock level for individual discs. You may also want to refer to the Country code list on page 85.

  • Page 80: 國家代碼列表

    設置選單 國家代碼列表 國家 輸入代碼 國家代碼 阿根廷 澳大利亞 奧地利 比利時 巴西 加拿大 智利 中國 丹麥 芬蘭 法國 德國 香港 印度 印尼 義大利 日本 韓國 馬來西亞 墨西哥 荷蘭 紐西蘭 挪威 巴基斯坦 菲律賓 葡萄牙 俄羅斯 新加坡 西班牙 瑞典 瑞士 中國臺灣 泰國 英國 美國...

  • Page 81: 連接

    Connecting Up Before making or changing any rear panel connections, make sure that all the components are switched off and unplugged from the power supply. Connecting other components 1 Use a stereo audio cable to connect the analog outputs of an external component to the AUDIO IN jacks of this unit.
  • Page 82 Connecting Up 3 Use a digital optical cable to connect the OPT. OUT jack of this system to the optical digital input of an external com- ponent. This will allow you to record from this system to an external digital recorder. jack should only be connected to a OPTICAL IN PCM audio output (32kHz, 44.1kHz or 48kHz for the...

  • Page 83: 連接外接天線

    Connecting Up Connecting external antennas External AM antenna Use 5–6 meters (15–18 ft.) of vinyl-insulated wire and set up either indoors (B) or outdoors (A). Leave the supplied AM loop antenna connected. External FM antenna Use 75Ω coaxial cable to hook up an external FM antenna (C).

  • Page 84: 附加資訊

    When set to on, the remote control functions normally, but all front panel controls are inoperative. • Change menu options using the 2 and 3 buttons. Press to select the currently displayed option. ∞ The system returns to standby. When set to on, the system beeps when you touch 6 or 0 on the front panel.

  • Page 85: 調整顯示屏亮度

    The disc pickup lens should not become dirty in normal use, but if for some reason it should malfunction due to dirt or dust, consult your nearest Pioneer authorized service center. Although lens cleaners for CD players are commercially available, we do not recommend using them since some may damage the lens.

  • Page 86: 碟片保存

    This system is designed for use with conventional, fully circular discs only. Use of shaped discs is not recommended. Pioneer disclaims all liability arising in connection with the use of shaped CDs and DVDs. 附加資訊 如果碟片留有指紋、灰塵等，請用軟乾布輕輕擦...

  • Page 87: 詞彙表

    The width of a TV screen relative to its height. Conven- tional TVs are 4:3 (in other words, the screen is almost square); widescreen models are 16:9 (the screen is almost twice as wide as it is high). Just as a book is split up into several chapters, a title on a DVD disc is usually divided into chapters.

  • Page 88: 語言代碼列表

    附加資訊 語言代碼列表 語言 編碼 語言 編碼 語言 編碼...

  • Page 89: 螢幕尺寸和碟片格式

    The table below shows the effect of various TV Screen settings on the different kinds of disc available. 在標準電視機或監察器上觀看 碟片的螢幕格式 設置 在寬螢幕電視機或監察器上觀看 碟片的螢幕格式 設置 附加資訊 螢幕尺寸和碟片格式 下表顯示了在不同電視螢幕設置下播放不同類型碟 片的效果。 效果 影片以寬螢幕顯示，頂部和底 部具有黑色條紋。 影片的兩邊被削去，影像充滿 整個螢幕。 影片看上去有受擠壓的感覺。 可設置為 在兩種設置下影片都正確顯 示。 效果 影片以寬螢幕顯示。 所顯示影片畫面的兩側有黑色 條紋。...

  • Page 90: 故障排除

    If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work. If there is an internal fault in the amplifier, the power is automatically shut off without the display showing the usual “...
  • Page 92 In this case, unplug the power cord and then plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your nearest Pioneer service center. Resetting the system returns all menu, picture and password settings to their factory defaults.

  • Page 93: 故障排除提示

    附加資訊 故障排除提示 問題 、 和 碟片裝入後自動彈出。 無法播放。 標記 出現在螢幕上。 標記 出現在螢幕上。 在設置OSD選單中進行更改 時，顯示 。 影像播放停止，操作按鈕無 法使用。 在設置畫面選單中所作的新設 置對於正在播放的碟片無效。 設置被取消。 無影像/無顏色。 畫面被拉伸或者縱 橫比未改變。 在播放中影像受到干擾或 螢幕變黑。 DVD和CD的音量之間有明 顯的區別。 措施 請檢查碟片是否清潔及完好無損（第92頁）。 請確認碟片已正確安置於導軌中。 請檢查碟片是否含有相容的地區號碼（第12頁）。 本機內部可能結露。請等待一段時間使水汽蒸發。請勿在空調附近使用本機。 請檢查碟片已正確裝入（帶標籤一面朝上）。 本系統禁止該操作。 所選功能不適用該碟片。 裝入的碟片是CD或VCD，而所更改的設置僅適用於DVD影碟。該設置在下次裝 入DVD時有效。 關閉電源，然後再用前面板上的 某些設置可以在播放碟片時進行，但祇有當碟片停止再重新開始播放時設置才 會生效。這並非故障。請注意，在設置畫面選單中進行的設置可能會取消恢復功 能。 如果因停電或拔離電源插頭而導致電源被切斷，則設置會被取消。...

  • Page 94: 系統復位

    附加資訊 問題 調諧器 收音機接收有噪音 自動調諧不能搜索某些電台。 播放 含有MP3曲目的碟片不能播 放。 試圖開始播放時，顯示 訊息。 碟片中的某些曲目似乎被 遺漏。 一般 遙控器似乎不工作。 無聲音或聲音失真。 注意 靜電等外界影響可能會使本機失靈。在此 情況下，拔出電源線插頭，然後重新插 上。如果問題仍然沒有解決，請就近諮詢 服務中心。 措施 請檢查頻率是否正確。 請檢查天線的連接是否正確。對於FM，請確認天線已完全拉出，並定位於最佳 的接收位置。對於AM,確保環型天線指向最佳方位。 如果無線電訊號太弱，那麼使用室外天線一般比附帶的室內天線效果更佳。 其他諸如電視機、日光燈和馬達等電氣設備會引發干擾。請關閉或移開這些設 備，或者移動天線試一下。 調諧間隔的幅度可能不適用您所在的國家或地區。請轉換調諧間隔幅度試一下 （參見第90頁）。 自動調諧祇能檢測到訊號良好的電台。若要使調諧更靈敏，請連接室外天線。 如果碟片是可錄製CD，請確認該碟片已完成錄製。 請確認碟片是否與ISO 9660相容。 請確認曲目是否是MPEG1音頻層3格式。 請確認曲目的取樣率是否是44.1或48kHz。 如果曲目名稱沒有以“.mp3”或“.MP3”結尾，則本系統識別不出它是MP3曲 目。 本系統祇能識別一張碟片上的前250個檔案夾和曲目。如果檔案夾/曲目多於這 個數字，則無法播放。 本系統與多段碟片不相容。如果播放此類碟片，則祇能播放第一段中錄製的曲 目。...
  • Page 95 附加資訊 規格 有源副低音揚聲器 大器部份 環繞聲 前、中、後 ... 30W，每聲道 Ω Ω 副低音揚聲器 ... 50W（100Hz，1% T.H.D.，4Ω） 連續輸出功率（RMS） 前、中、後 ... 40W，每聲道 Ω Ω 副低音揚聲器 ... 65W（100Hz，10% T.H.D.，4Ω） 電源部份 電源要求 多電壓機型 ... AC 110-120 V/220-230V/240V 澳大利亞和新西蘭的型號 ... 240V, 50/60 Hz 功耗 澳大利亞和新西蘭的型號 ... 175W 圓形2插頭...
  • Page 96 ± En/ChH 附加資訊 衛星揚聲器 衛星揚聲器 類型 ... 密封型，防磁（EIAJ） 揚聲器 ... 8.7cm（錐型） Ω 額定阻抗 ... 8Ω 頻率範圍 ... 100至20,000Hz 最大輸入 ... 40W(EIAJ) 前、後置揚聲器 中置揚聲器 訊噪比 ... 100dB(EIAJ) 動態範圍 ... 97dB(EIAJ) 失真 ... 0.004% 頻率響應 抖晃度 ... 低於可測限度 Ω Ω 輸出電平 ... 1Vp-p(75Ω) Ω...
  • Page 97 Note: • Specifications and design subject to possible modification without notice, due improvements. Published by Pioneer Corporation. Copyright © 2001 Pioneer Corporation. All rights reserved. 附加資訊 調諧器部份 FM調諧器 頻率範圍 ... 87.5MHz至108.0MHz Ω 天線 ... 75Ω不平衡 AM調諧器 頻率範圍 天線 ... 環狀天線（附帶) 其他...
  • Page 98 附加資訊 En/ChH...
  • Page 99 附加資訊 En/ChH...
  • Page 100 PIONEER CORPORATION PIONEER ELECTRONICS [USA] INC. PIONEER ELECTRONICS OF CANADA, INC. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS AUSTRALIA PTY. LTD. PIONEER ELECTRONICS DE MEXICO S.A. DE C.V. <TSWEW/01G00001> 演示 本系統具有演示功能。如果演示模式已啟動，則 在系統的插頭插入電源插座之後，或當系統處於 DVD或CD播放模式下的閒置時間超過5分鐘時，演...

This manual is also suitable for:

S-dv77stHtz-77dvXv-dv77

Table of Contents