Using A Tripod - Canon EOS C300 Mark II Instruction Manual

Preparing the Camera
Setting the Screen to Black & White
The viewfinder and LCD screen display in color by default but you can set
them to black & white. Even when the screen is black & white, onscreen
text and icons will still be displayed in color.
42
Operating modes:
1 Open the display selection menu for the viewfinder or LCD screen.
Assistance Functions] > [B&W Image] > [Display on LCD] or
• [
[Display on VF]
2 Select [On] and then press SET.
• You can also change the video output from the MON. and HDMI OUT terminals (together) to black & white.
• Repeat steps 1 and 2 as necessary to select other screens/video outputs.
3 Open the B&W image's [Activate] submenu.
Assistance Functions] > [B&W Image] > [Activate]
[
4 Select [On] and then press SET.

Using a Tripod

The camera is shipped with the TB-1 Tripod Base for tripods with 0.95 cm (3/8") screws.
You can mount the camera on a tripod but do not use tripods with mounting screws
longer than 5.5 mm (0.2 in.) as this may cause damage to the camera.
Using a Tripod with 0.64 cm (1/4") Mounting
Screws
To use a tripod with 0.64 cm (1/4") mounting screws, first
attach the supplied tripod adapter base to the camera
and then attach the tripod to the adapter base.
1 Remove the original TB-1 Tripod Base from the
camera.
• Remove the 4 screws and then remove the base.
2 Attach the supplied tripod adapter base for 0.64 cm
(1/4") tripods.
• Firmly screw in the 4 screws.
3 Attach the tripod.
• Firmly screw in the tripod screw.
[ Assistance Functions]
[B&W Image]
[Activate] ..... [Off]
[Display on LCD] ..... [On]
[Display on VF] ..... [On]
5.5 mm