Scan Station Details; Updating Time/Date Remotely - Kodak Scan Station 710 Administrator's Manual

Scan Station details

Updating the Time/Date
remotely
A-61796 September 2014
To view the details of a selected Scan Station:
• Select Scanner>Device>Details. The Details dialog box will be
displayed with detailed information about the selected Scan Station
(e.g., software version, IP address, etc.).
If your network has access to an NTP server, you can configure all of
your Scan Stations to synch their internal clock with the NTP server by
using the Update Time/Date option.
1. Select Scanner>Device>Update Time/Date. The following dialog
box will be displayed.
2. Enter the Server Name or IP Address of the NTP server from which
you want to synchronize the Scan Station's clock.
3. Select the port of the NTP server. The default is 123.
4. Enter the amount of time (in milliseconds) after which the Scan
Station will stop attempting to synchronize its internal clock
(500 milliseconds = 1/2 second). Do not change the default, unless
you experience problems.
5. Select Version 3 or 4 of the NTP server.
6. Click Update.
9-25