Powdered Detergent - Panasonic ECONAVI NA-FS95G3WAU Operating Instructions Manual

How to add detergent
1
Load clothes in the tub, and
●
The washing machine displays the water level
appropriate for the laundry load. (P.20)
Liquid bleach Liquid bleach
Liquid detergent Liquid detergent
Note
●
Before adding detergent, bleach, softener or soap
power, read its directions and precautions carefully.
●
We recommend using low-sudsing detergent.

Powdered detergent:

●
Wipe dry the powdered detergent inlet if it is wet.
(Failure to do so may cause detergent to
remain.)
Softener:
●
Keep the level of the softener
below the "MAX" indication to
prevent the softener from
flowing immediately.
●
Softener is automatically
added to the tub at the end of the rinse cycle.
●
Since softener solidifies easily, do not leave it in
the softener inlet for a long period of time
(12 hours or longer).
2
Press .
Soap powder
To dissolve soap powder:

Pour 5 litres of water at about
30 °C into a container.

Dissolve the soap powder by
adding it little by little while
churning the water.
Powder bleach:
●
When using the Timer Delay function, wrap
bleach around a white article before adding it to
the tub to prevent other clothes from discolouring.
Soap powder:
●
In order to keep the soap powder from
hardening or sticking, mix it well and dissolve it.
●
Be certain to rinse thoroughly. (Failure to do so
may cause clothes to become tinged with yellow
or the smell of soap.)
●
Do not add too much, or add directly into low
temperature water. (Doing so may cause soap to
not completely dissolve, or soap scum to adhere
MAX
inside the hose or the tub. The soap scum may
float and stain clothes.)
Add detergent in the amount
appropriate for the water level.
(Detergent compartment locations are
illustrated below.)
Powdered detergent Powdered detergent
Powder bleach Powder bleach
Softener Softener
21