The Phone's Web Interface - Snom 760 User Manual

snom 760 User Manual
When the phone is in user mode and the Maintenance menu is on the display, press key 2
2
to switch the phone to administrator mode. You will be asked for the administrator
ABC
password. The default administrator password is 0000 (4 x zero).

The phone's web interface

Opening the phone's web interface: See page 29.
Firmware versions below 8.7.4
When the web interface is opened for the first time upon initialization, you will see the Security page).
We urge you to set administrator and HTTP passwords to protect your phone from remote attacks.
The default administrator password is 0000 (4 zeros); there is no default HTTP password.
Note: If you set your own passwords, be sure to write them down and store them in
a secure place. Without the administrator password, you will not be able to return the
phone and the web interface from user mode to administrator mode.
If you do not wish to set an HTTP password, you can turn off the reminder on the phone's display
until the next reboot or forever by clicking on the respective button. If you change your mind later, you
can set the password on the phone's web interface, "Advanced"page > "QoS Security" tab > "HTTP
Server" (see ) or turn off the warning later at Advanced > QoS Security > Security > Ignore security
advices.
Firmware versions 8.7.4 and higher
When you register the first account during the initialization of the phone, your SIP user name and
password will be registered as the HTTP user name and password. If you wish to change them later,
you can do so on the phone's web interface > Advanced > QoS Security > HTTP Server.
28
Getting to Know Your Phone