Quick Setup Via Your Pc - TP-Link M7350 User Manual
Lte-advanced mobile wi-fi
Hide thumbs
Also See for M7350:
- User manual (63 pages) ,
- Quick installation manual (19 pages) ,
- User manual (57 pages)
Table of Contents
Advertisement
3.4.2 Quick Setup via your PC
1.
Open a web-browser, enter the default address
the Address field and then press Enter. When the login window appears, enter admin (in
lower-case letters) for both username and password, and then click the Login button.
Note:
If the above screen does not pop-up, it means that your Web-browser has been set to a proxy.
Go to Tools menu > Internet Options > Connections > LAN Settings, in the screen that
appears, cancel the Using Proxy checkbox, and click OK to finish it.
2.
After successful login, there will appear the following page. You can set up a new login
M7350
LTE-Advanced Mobile Wi-Fi User Guide
http://tplinkmifi.net
Figure 3-1 Login Windows
-12-
or
http://192.168.0.1
in
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the M7350 and is the answer not in the manual?
Questions and answers
TP-LINK Wif-Fi M7350 does not boot-up past displaying the TP-LINK Logo. Pressing the reset button has no effect.
If your TP-Link M7350 is stuck in a boot loop and the reset button does not work, the device may be defective. You can try firmware recovery, but if that does not help, it is recommended to contact the seller to check the warranty. If the device is out of warranty, you might need to purchase a new one.
This answer is automatically generated