TP-Link VX420-G2v Setup Manual

TP-Link VX420-G2v

Important Message

Your modem has been pre-configured; you do not need to follow each step of the setup

guide but should retain this document if you need to configure your equipment manually.

Physical Connection

1. Ensure your NBN Connection Box is turned on.

2. Plug the supplied yellow Ethernet cable from the UNI-D1 port on your NBN Connection

Box into the blue WAN port on your TP-Link modem.

If UNI-D1 doesn't work, try each UNI-D port.

3. Plug in the supplied power cable and turn your TP-Link modem on using the Power

button.

Modem Setup Guide – NBN FTTP

Table of Contents

Do you have a question about the VX420-G2v and is the answer not in the manual?

Robert McPherson.

January 18, 2025

format for SSID

Kylie Taylor

February 21, 2025

Hello Is there a separate wifi button that can be turned on and off on the product as we used the modem with an ethernet chord.

Page 1 2. Plug the supplied yellow Ethernet cable from the UNI-D1 port on your NBN Connection Box into the blue WAN port on your TP-Link modem. If UNI-D1 doesn’t work, try each UNI-D port. 3. Plug in the supplied power cable and turn your TP-Link modem on using the Power button.
Page 2 UNI-V1 port on your NBN Connection Box. If UNI-V1 doesn’t work, try UNI-V2 port. Once you receive notification that your TPG NBN service is active, your TP-Link VX420-G2v should now be online. If you are still having issues, please call us on 1300 997 271 for further assistance.
Page 3 You can change your WiFi details if you prefer to customise your WiFi network. 1. Use a device to connect to your modem via WiFi or Ethernet cable. 2. Go to http://192.168.1.1 in your browser. 3. Log in with your TP-Link modem password. By default, the password is admin.
Page 4 Modem Setup Guide – NBN FTTP 4. On the home screen, click Wireless on the menu. 5. Enter your new Network name (SSID) and Password as desired. 6. Click Save. Connect your devices using your new WiFi Network Name (SSID) and Password.