Power Board Adjustment - Sanyo VCC-9400P Service Manual

2. POWER BOARD ADJUSTMENT

2-1. Disassembly
1. A camera unit and a base unit
are separated. A power supply is
surely shut off.
.
4. Microswitch of base unit.
7. The attached state
2-2 Assembly
1. A tape is removed.
2. The attachment screw of a
rotation unit is removed.
5. A switch is fixed to ON on a
tape.
8. A power supply is switched on
with the switch of a main board
pushed.
2. It incorporates according to the pin which determines a position.
3. A rotation unit is pulled out.
6. It attaches base unit on a rotation
unit.
9. A power supply board.
- -
4