Related Manuals for Ozito OZMW90A
Summary of Contents for Ozito OZMW90A
-
Page 1: Operating Instructions
MIG WELDER 90 Amps MODEL NO. OZMW90A OPERATING INSTRUCTIONS Always Wear Eye, Face & Ear Protection www.ozito.com.au... - Page 2 SPECIFICATIONS - MODEL NO. OZMW90A Input: 230v ~ 50Hz Current range: 60 - 90A Welding wire: 0.6mm - 0.9mm Duty cycle: 10% - 90A, 30% - 60A Weight: 14kg Features: Overload protection Portable Accessories included Handle 1. Carry Handle 7. Earth Clamp 2.
- Page 3 We hope you will enjoy using this product for many years. The Ozito Mig Welder OZMW90A has been designed to weld steel alloys. Its varying current range, light weight and portability make it an ideal welder for many jobs.
-
Page 4: Safety Instructions
This electrical equipment has been designed for 230V and 240V only. Always check that the power supply corresponds to the voltage on the rating plate. Note: The supply of 230V and 240V on Ozito products are interchangeable for Australia and New Zealand. - Page 5 Young children should be supervised to ensure that they do not play with this equipment. 18. Replacement of the supply cord. If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Ozito Service Agent in order to avoid a hazard.
- Page 6 SAFETY INSTRUCTIONS FOR WELDERS Under no circumstances should the internal components be tampered with. Always protect your eyes and face with a welding mask. Wear appropriate protective clothing such as a welding apron and sleeved gloves etc. Avoid exposing skin as UV rays are produced by the arc. Screen off the work place to protect others working nearby from UV rays.
-
Page 7: Operation
OPERATION Setting the Welding Current The welding current must be regulated in accordance with the diameter of the electrode and the thickness of the metal being used. Below is a table suggesting suitable ratios. Approximate Welding Electrode Diameter Suggested Filter Lens Current Range 30 to 100 amps 0.6mm Hard wire... - Page 8 OPERATION (cont.) 9. Take your welding tip and thread over the wire and screw onto the gun. Take your shroud and screw over the welding tip. Using pliers to cut flush with shroud end. • Position the two pieces of metal you wish to join. •...
- Page 9 OPERATION (cont.) Warning! Failure to use a welding mask can result in “eye flashing” where your naked eye sees the arc. Eye flashing is harmful and can damage your eyes. Always look through the tinted glass of the welding mask when observing the arc.
- Page 10 OPERATION (cont.) Starting to weld BEFORE WELDING ENDURE THAT: You have read the safety section of this manual. All oil. Petrol and flammable containers have been removed from the area. There is good all round ventilation. Particularly at the front and rear of the unit. You have an adequate fire-fighting appliance on hand.
-
Page 11: Maintenance
Note: Ozito Industries will not be responsible for any damage or injuries caused by the repair of the welder by an unauthorised person or by mishandling of the welder. -
Page 12: Warranty
PURCHASED FROM: ________________________________________________ DATE PURCHASED: ________________________________________________ 3 YEAR REPLACEMENT WARRANTY Your Ozito product is guaranteed for a period of 36 months from the original date of purchase and is intended for DIY (Do it yourself) use only. WARNING The following actions will result in the warranty being void.
Need help?
Do you have a question about the OZMW90A and is the answer not in the manual?
Questions and answers