Wiper (SCU-2370/VAC/VAC1)
You can use Wiper to wipe out the front glass of the housing so as
to secure a clear view.
To activate Wiper, set the menus below to your preference.
Pump Enable:
Activate or deactivate the pump function.
-
Enable On: Activate the pump function that is connected
to the wiper. Creates detailed submenu items
related to the Pump function.
-
Enable Off: Deactivate the pump function that is connected
to the wiper.
With Enable On, the Aux output function in Alarm Setting will be
disabled.
Wiper :
Activate or deactivate the wiper function.
Preset :
Select a Preset run with Wiper function.
Set the preset to face the pump's water outlet.
Pump Delay :
Operating time of the pump. (1 ~ 30 seconds)
Duration :
Operating time of the pump and wiper. (6 ~ 30 seconds)
If the pump is turned off, means operating time of the wiper.
Duration Off :
Operating time of the wiper. (6 ~ 30 seconds)
Pump Delay
: Pumps water
: Wiper clears the
towards the
housing's front
glass.
(Wiper & Pump Operation)
Duration
: Wiper clears out
housing during the
remaining water.
pumping.
Main Menu
Camera Setting
Sequence Setting
▶
P/T Setting
OSD Setting
Alarm Setting
Initialize
Status
P/T Setting
Pan Limit
Tilt Limit
Area Setting
Area Masking
Housing Load
▶
Wiper
Prop. P/T
Image Hold
Wiper
Pump Enable
▶
Wiper
Duration
Wiper
Delay Off
▶
Pump Enable
Wiper
Preset
Pump Delay
Duration
Delay Off
03 KG
ON
OFF
OFF
OFF
06 SEC
ON
OFF
001
03 SEC
06 SEC
06 SEC
English - 51