Page 1
User Manual ESCAPE LIGHT SMOKE ALARM LSI-601 ESCAPE LIGHT TOAST PROOF SMOKE ALARM LSO-601 Please read me – as I could save your life. Please retain this user manual for future reference...
CONTENTS INTRODUCTION ALARM TEST BLUESCAPE™ ULTRA BRIGHT ALARM SMART SILENCE™ TECHNOLOGY ROUTINE MAINTENANCE SENSOR TECHNOLOGY WHAT TO DO IN CASE OF FIRE APPLICATION IN YOUR HOME POSITIONING REPAIR LIMITATIONS TROUBLESHOOTING HOW TO INSTALL YOUR DISPOSAL SMOKE ALARM 1 Preparation HOW TO MAKE YOUR HOME 2 Install mounting plate SAFER 3 Install 9V battery...
Sprue Safety Products Limited. The FireAngel range of products is constantly Bluescape™ uses the latest ultra bright blue being improved and expanded. Please visit LED technology to illuminate your escape www.fireangel.co.uk to find out about the...
WARNING: Your FireAngel smoke alarm There are two main types of smoke alarm. can be installed into a new build property The LSI-601 Standard Smoke Alarm uses an as additional protection to an existing smoke ionisation type sensor to detect the presence detection system only.
Page 6
(Tenancy building, student accommodation) application, nor for any other purpose than Your FireAngel smoke alarm can also be used described above. in individual flats and bedsits, providing the same conditions are met as for a single-family residence.
• In wall positions that are more than 30cm overheating electrical cables. (12”) away from the ceiling (see ‘How to It is recommended that your FireAngel install your smoke alarm’). smoke alarm is NOT to be fitted in the • In ‘dead air’ spaces (see diagram on previous page).
(4 INCHES) used by different residents such as blocks of flats and hotels. The FireAngel smoke alarm may not alarm before a fire causes damage, injury or death, as the smoke may not reach the smoke alarm in time.
Page 9
Stereos, traffic and other loud sources may prevent or extinguish fires. also prevent the alarm being heard. Heavy This FireAngel smoke alarm has a limited life sleepers and residents under the influence of 10 years and should not be considered as a of alcohol or drugs may also not hear or substitute for life or property insurance.
HOW TO INSTALL YOUR If the alarm is to be mounted on a wall, ensure the mounting plate is aligned correctly. SMOKE ALARM The mounting plate has an arrow moulded into the plastic. This indicates the orientation IMPORTANT: Make sure you have read in which the mounting plate should be and understood this manual before installed.
CAUTION: The horn is designed to be 4 Fit Your FireAngel Smoke Alarm loud to wake you in an emergency. The alarm will only lock into place in one Avoid placing your ear close to the alarm particular position.
Alkaline Type Should your FireAngel smoke alarm enter a Energizer 522; Duracell MN1604; Duracell 9V low battery condition, the unit will emit an Ultra; Energizer 9V Ultra+; Gold Peak 1604A.
ALARM TEST b Remove the existing battery and replace with a new battery, from the list on previous page, making sure that the positive and negative connections are in the correct position. If unsure see diagram in section 3 ‘Install 9v battery’ on Page 8. a Press the test button in the centre and c Replace the alarm on its mounting plate, release.
Page 14
NOTE: The test button accurately tests WARNING: Test your smoke alarm at the alarm’s smoke sensing circuit; there least once per week. is no need to test your alarm with smoke. WARNING: As with any bright light, do If your smoke alarm fails to give an audible not look directly into the Escape Light.
ALARM SMART SILENCE™ DANGER: If your FireAngel smoke alarm emits the full alarm signal and you are not testing the unit, the smoke alarm is warning you of a potentially dangerous situation that requires your immediate attention. Only use the alarm silence function after making sure that there is no ongoing fire emergency situation.
Your alarm will automatically return to full section ‘Alarm Test’ on page 11. Any test sensitivity on completion of the reset cycle failures should be reported to the FireAngel and the red LED will revert to flashing Technical Support Team on page 19.
IMPORTANT: Do not use solvents or • If you have made a family escape plan and cleaners on your FireAngel smoke alarm, practiced it with your family, you have as they may cause damage to the sensor increased their chances of escaping safely.
Line. They will give you more ideas about how to make your home safer from fires and how to If your FireAngel smoke alarm is no longer plan your family’s escape. under warranty, replace immediately with a comparable FireAngel brand smoke alarm.
TROUBLESHOOTING Problem Solution Your FireAngel smoke alarm goes into alarm • LSI-601 Only: Your FireAngel smoke when first connecting the battery alarm does require a short time to settle when activated. The alarm should stop automatically after a short time.
Page 20
(see the section on ‘Positioning’). • Clean the smoke alarm (see the section on ‘Routine Maintenance’). • For LSI-601 smoke alarm only remove build-up of static electricity by wiping the front cover of the alarm with a slightly damp cloth.
Page 21
If you have any questions about the advice of the manufacturer should be operation of your alarm, please contact the sought FireAngel Technical Support Team between 9am - 5pm Monday – Friday. Telephone: 0800 141 2561 (1-800 523171 in EIRE) or e-mail: technicalsupport@fireangel.co.uk...
If a fire does start, you with your local authority, retailer or the must increase your chances of escaping. FireAngel Technical Support Line (see page To have a good fire safety program you 19 for contact details) for recycling/disposal must: advice as regional variations apply.
Page 23
they are properly installed, away from any them, make sure that all your children combustible materials. understand that they should go and wait for you there if there is a fire. • Keep portable heaters and open flames such as candles away from combustible •...
5(five) years for the LSI-601 and LSO- of purchase in the case of the LSI-601 and 601 products. This warranty does not cover LSO-601 Sprue Safety Products Ltd, at its...
PRODUCT RANGE We recommend that you contact the Sprue Safety Products Ltd. manufacture an FireAngel Technical Support Line in the first extensive range of home safety products instance on 0800 141 2561, text phone users including smoke alarms, carbon monoxide...
Page 28
UK Textphone users dial 18001 0800 141 2561 Eire dial 1-800 523171 Email technicalsupport@fireangel.co.uk Web www.fireangel.co.uk A Sprue Safety Products Brand Independently tested LSI-601/ LSO-601 Sprue Safety Products Ltd. to conform to GN0094R5 EN 14604:2006 Vanguard Centre, Sir William Lyons Road, Coventry CV4 7EZ UK...
Need help?
Do you have a question about the LSI-601 and is the answer not in the manual?
Questions and answers