Divx® Video On Demand; Player Mode - Samsung PE40C User Manual

8
System
Problem
The Anynet+ device does not
play.
The connected device is not
displayed.
8.17 DivX® Video On Demand
m
MENU [
Shows the registration code authorized for the product. If you connect to the DivX web site and register
using that code, you can download the VOD registration file.
For more information about DivX® VOD, visit "http://vod.divx.com".

8.18 Player Mode

m
MENU [
Select Player Mode.
Changing Player Mode
MagicInfo Lite

Changing

Changing

You cannot use the play function when

is in progress.
Check whether or not the device supports Anynet+ functions.

Check whether or not the HDMI cable is properly connected.

Check whether

setup menu.
Search Anynet+ devices again.

Anynet+ requires an HDMI connection. Make sure the device is

connected to your product with an HDMI cable.
Some HDMI cables may not support Anynet+ functions.

If the connection is terminated because there has been a power

failure or the HDMI cable has been disconnected, please repeat
the device scan.
] System DivX® Video On Demand
] System Player Mode
will change the functions in
/ MagicInfo Premium S
Player Mode will automatically reboot the product and apply changes.
Player Mode will reset all the previous settings configured in
Possible Solution
Anynet+ (HDMI-CEC)
ENTER
ENTER [ ]
Contents Home.
/ MagicInfo Videowall S
Plug & Play (initial setup)
is set to On in the Anynet+
[ ]
Player Mode.
8 System
177