Nokia N9 Service Manual page 14

13) Use the SRT-6 to open the right side of the
DISPLAY ASSEMBLY.
15) Turn the DISPLAY ASSEMBLY over. Be careful not
to damage the connectors underneath the DISPLAY
ASSEMBLY.
17) Use the SS-93 to disconnect the two DISPLAY
ASSEMBLY connectors. Be careful not to damage the
connectors or any nearby components.
14
14) Slightly pull the DISPLAY ASSEMBLY to direction
shown to release the three remaining clips.
16) Disconnect the BATTERY with the tweezers to
avoid short circuit.
18) Remove the DISPLAY ASSEMBLY.
Conf idential | Copyright © 2011 Nokia | A ll rights reserved
Nokia N9 (RM-696)
L1L2 Service Manual
Version 5.0