Table of Contents
Advertisement
To create a secure network using WPS:
1. From the navigation panel, go to Advanced Settings >
Wireless > WPS tab.
2. In the Enable WPS field, select Enabled, then click Apply.
3. Set up WPS via the PIN code or PBC (Push Button Control)
method. Refer to the succeeding steps for more details.
To set up WPS via the PIN code method:
1. Power on your client device that supports WPS PIN (Personal
Information Number) code method.
2. Enter the PIN code of the client device and click Enroll.
NOTE: The PIN code can be found either at the bottom of the packaging
case or on the user interface of the client device.
3. Start the WPS PIN process on the client device.
NOTE: For details, refer to the user manual of the client device.
4. If you want to change the wireless router PIN code, click
Generate PIN or Restore PIN to create or restore the PIN.
To set up WPS via the PBC method:
1. Power on your client device that supports WPS.
2. On your wireless router WPS screen, click Start PBC. You can
also press the WPS button on the left side of your wireless
router.
3. Press the WPS button on the client device.
25
Hide quick links:
Advertisement
Table of Contents
