Table of Contents
Advertisement
7. Select the operating channel for your wireless router. Select
Auto to allow the wireless router to automatically select the
channel that has the minimum interference.
8. Extension Channel: The extension channel that you can assign
is based on the following:
• When Bandwidth is set to 20MHz, the extension channel is
disabled.
• When Wireless Channel (main channel) is set to 1, select
channel 5 as the extension channel.
• When the Wireless Channel is set to channel 9, select channel
5 or 13 as the extension channel.
9. WMM: Enables or disables the use of QoS. The QoS (Quality
of Service) function allows you to differentiate WMM (Wi-Fi
Multimedia) traffic and provide it with high-priority forwarding
service.
10. Select any of these authentication methods:
• Open System: This option provides no security.
• WPA/WPA2 Personal/WPA Auto-Personal: This option
provides strong security. You can use either WPA (with
TKIP) or WPA2 (with AES). If you select this option, you must
use TKIP + AES encryption and enter the WPA passphrase
(network key).
• WPA/WPA2 Enterprise/WPA Auto-Enterprise: This option
provides very strong security. It is with integrated EAP server
or an external RADIUS back-end authentication server.
11. When done, click Apply.
NOTE: Your wireless router supports the maximum transmission rate
of 54Mbps when the Wireless Mode is set to Auto and the encryption
method is WEP or TKIP.
21
Hide quick links:
Advertisement
Table of Contents
