Function; Trigger Output; Trigger Mode - Yamaha RX-V779 Owner's Manual

Function

Configures the functions that make the unit easier to use.
■
Display Set
Configures the settings related to the front display and TV screen display.
Dimmer (Front Display)
Adjusts the brightness of the front display.
Setting range
-4 to 0 (higher to brighten)
• The front display may become dark when "ECO Mode" (p.117) is set to "On".
Short Message
Selects whether to display short messages on the TV screen when the unit is
operated (such as input selection and volume adjustment).
Settings
On Displays short messages on the TV screen.
Off Does not display short messages on the TV screen.
Wallpaper
Selects the image to be used as wallpaper on the TV.
Settings
Displays the piano image on the TV screen when there is no video
Piano
signal.
Displays a gray background on the TV screen when there is no video
Gray
signal.
■

Trigger Output

Sets the TRIGGER OUT jack to function in sync with the power status of each zone or
input switching.

Trigger Mode

Specifies the condition for the TRIGGER OUT jack to function.
Settings
The TRIGGER OUT jack functions in sync with the power status of the
Power
zone specified with "Target Zone."
The TRIGGER OUT jack functions in sync with the input switching in
the zone specified with "Target Zone."
Source
An electronic signal is transmitted according to the setting made in
"Source."
Select this to manually switch the output level for electronic signal
Manual
transmission with "Manual."
Source
Specifies the output level of the electronic signal transmitted with each input,
switching when "Trigger Mode" is set to "Source".
Choices
HDMI 1–5, AV 1–6, V-AUX, AUDIO 1–2, TUNER, PHONO*, (network sources), Bluetooth, USB
* RX-V779 only (except for U.S.A. and Canada models)
Settings
Stops the electronic signal transmission when you switch to the input
Low
source specified in this option.
Transmits the electronic signal when you switch to the input source
High
specified in this option.
Manual
Switches the output level for electronic signal transmission manually when "Trigger
Mode" is set to "Manual". This setting can also be used to confirm proper function
of the external device connected via the TRIGGER OUT jack.
Choices
Low Stops the electronic signal transmission.
High Transmits the electronic signal.
115
En