Kenmore 41774182300 Installation Instructions Manual

Installation
Instructions
Gas & Electric
Dryer
Before beginning installation, carefully read these instructions. This will simplify the installation and ensure the
dryer is installed correctly and safely. Leave these instructions near the Dryer after installation for future reference.
NOTE: The electrical service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Electrical Code, ANSI/NFPA 70.
NOTE: The gas service to the Dryer must conform with local codes and ordinances and the latest edition of the
National Fuel Gas Code ANSi Z223.1.
For your safety the information
in this manual must be followed to minimize the
risk of fire or explosion or to prevent property
damage, personal injury or toss of life,
-Do not store or use gasoline or other
flammable vapors and liquid in the vicinity of
this or any other machine,
- WHAT TO DO IF YOU SMELL GAS
• Do not try to light any machine,
• Do not touch any electrical switch; do not
use any phone in your building,
• Clear the room, building or area of att
occupants,
• Immediately catt your gas supplier from a
neighbor's phone, Follow the gas
supptier's instructions,
• If you cannot reach your gas supplier, catt
the fire department,
Installation and service must be performed by
a qualified installer, service agency or the gas
supplier,
Contents
SUBJECT
Pre-lnstaltationRequirements
Electrical Requirements
Exhaust System Requirements
Gas Suppty Requirements
Location of Your Dryer
Rough-In Dimensions
Unpacking
Reversing Door Swing
Electrical Installation
Grounding Requirements
Electrical Connections--3-wire
Electrical Connections--4-wire
Installation
Replacement Parts
Lint Blade Retaining Pin Location
PAGE
2
2
2-3
3
4
5
5
5
6
6
7
7
8
8
8
Sears, Roebuck and Co.,
Hoffman Estates, IL 60179 U.S.A.
Printed in U.S.A. P/N 134313400 (0309)