Sanyo DVD-SL33 Instruction Manual page 2

CAUTION – INVISIBLE LASER RADIATION WHEN OPEN AND
INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.
ADVARSEL – USYNLIG LASER STRÅLING VED ÅBNING, NÅR
SIKKERHEDSAFBRYDERE ER UDE AF FUNKTION, UNDGÅ UDS ÆTTELSE
FOR STRÅLING.
VARNING – OSYNLIG LASER STRÅLNING NÄR DENNA DEL ÄR ÖPPNAD
OCH SPÄRR ÄR URKOPPLAD. STRÅLEN ÄR FARLIG.
VORSICHT – UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN
DECKEL GEÖFFNET UND WENN SICHERHEITSVERRIEGELUNG
ÜBERBRÜCKT IST. NICHT, DEM STRAHL AUSSETZEN.
VARO – AVATTAESSA JA SUOJALUKITUS OHITETTAESSA OLET ALTTIINA
NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. ÄLÄ KATSO SÄTEESEEN.
CAUTION – USE OF CONTROLS OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
THIS COMPACT DISC PLAYER SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALI-
FIED SERVICE PERSONNEL.
- The apparatus shall not be exposed to dripping or splashing.
- No objects filled with liquids, such as vases, shall be placed on the
apparatus.
Do not use where there are extremes of temperature (below 5 °C
-
or exceeding 35 °C) or where direct sunlight may strike it.
- Because of the DVD player extremely low noise and wide dynamic
range, there is a tendency to set the volume on the amplifier higher
than necessary. Doing so may produce an excessively high out-
put from the amplifier which can cause damage to your speakers.
Please be careful in this regard.
- Sudden changes in the ambient temperature may cause conden-
sation to form on the optical lens inside the unit. If this happens,
take out the disc, leave the unit for about 1 hour, and then proceed
to operate.
- When carrying the unit, be sure to remove a disc which may be
inside and turn the power off. Then unplug the power cord from the
AC outlet after 10 seconds. Carrying the unit with a disc inside
may damage the disc and/or the unit.
- Do not install this equipment in a confined space, such as a book
case or built in cabinet.
- The unit is not completely disconnected from the mains when the
z/ON button is set to the z position.
1
PRECAUTIONS
- The unit is automatically set to the screen saver mode after ap-
proximately 10 minutes have elapsed under the stop or pause
mode.
- The unit is automatically set to the standby mode after approxi-
mately 30 minutes have elapsed under the complete stop mode.
Important information:
To connect this unit to a TV, TV must have a set of Audio/Video com-
posite input sockets at least. You cannot use an RF input socket or
aerial terminal to connect this unit.
This product incorporates copyright protection technology that is pro-
tected by method claims of certain U. S. patents and other intellectual
property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be autho-
rized by Macrovision Corporation, and is intended for home and other
limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
CLASS 1 LASER PRODUCT
LUOKAN 1 LASERLAITE
KLASS 1 LASERAPPARAT