Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Electrolux BEAM Alliance
Summary of Contents for Electrolux BEAM Alliance
- Page 1 BEAM Alliance Operation Manual...
-
Page 2: Important Safeguards
IMPORTANT SAFEGUARDS When using an electronic appliance, basic safety precautions should always be followed, including those listed below. READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM SYSTEM. WARNING To reduce the risk of re, electric shock or injury: • This vacuum cleaner is intended for dry pick up only. Do not use on wet surfaces or pick up any liquids, hot debris or any ammable items that would cause harm to the vacuum cleaner. -
Page 3: General Information
Dear Beam Customer; Congratulations on your new Beam Alliance Central Vacuum! You have just purchased Beam’s most innovative and intuitive Central Vacuum. Thank you for your support. For maximum bene t, please read this instruction manual before installing and operating your central vacuum. You will want to keep these instructions for future reference. -
Page 4: Grounding Instructions
GROUNDING INSTRUCTIONS This vacuum must be grounded (earthed). If it should malfunction or breakdown, grounding (earthing) provides a path of least resistance for electric current to reduce the risk of electric shock. This vacuum is equipped with a cord having an equipment-grounding conductor and grounding (earthing) plug. The plug must be inserted into an appropriate outlet that is properly installed and grounded (earthed) in accordance with all local codes and ordinances. -
Page 5: Installation
INSTALLATION Installation of Power Unit The power unit hangs on the mounting bracket which is screwed to the wall. The bottom screws of the mounting bracket should be about 48” (122 cm) up from the oor to allow convenient removal of the dirt bucket. For proper motor cooling, there must be at least 12”... -
Page 6: Muffler Installation
Figure 5b Figure 5a BASIC OPERATION FOR BEAM ALLIANCE POWER UNIT To operate, simply plug the hose into one of the handy wall inlet valves. The metal ring on the hose cuff will complete a low-voltage electrical circuit, which in turn activates a relay and turns on the system’s power unit. To turn off the power unit, simply unplug the hose from the inlet. -
Page 7: Power Button
BASIC OPERATION FOR BEAM ALLIANCE HOSE The BEAM Alliance hose is designed to work as an integrated system with the BEAM Alliance Power Unit. It will not work with any other Central Vacuum System. The BEAM Alliance Hose System brings more options to... -
Page 8: Hepa Filter Maintenance
The BEAM Alliance central vacuum system is equipped with a ow-thru motor and will never need lubrication. Should you experience any problems with your motor, please contact your local authorized dealer/distributor. • Power unit can be dusted off with a clean, soft cloth. Caution: do not use liquid cleaners or water as an electrical shock may occur. -
Page 9: Troubleshooting
Hose Care For optimum bene t, the hose should be used and stored at temperatures above 40˚F (5˚C). Always hang up the hose when not in use using the hose hanger supplied. If hose should become clogged, insert the wand end into the utility inlet on the power unit. -
Page 10: Service Information
SERVICE INFORMATION The instructions in this booklet serve as a guide for routine operation and maintenance. For further Information contact your local authorized dealer/distributor BEAM ALLIANCE LED/LCD ICON CHART SYMBOL DESCRIPTION AVAILABILITY MEANING ACTION REQUIRED ON/OFF Button Standard Turns power unit on or off... -
Page 11: Lifetime Limited Warranty
Motors and electrical components in Beam Alliance power units are warranted for 15 years. Should any defect in material or workmanship appear within the time of the above warranty, the selling BEAM Dealer should be contacted. - Page 12 Sold and serviced by: © 2013 Electrolux Home Care Products Ltd. #87238-R1...