Operation - Wadia di322 Owner's Manual

USB Input Operation and Driver Installation
The di322 USB Input provides the capability to play-
back music from a computer, when the computer is
connected to the rear panel USB connector.
Note: The USB Input is for direct connection to a com-
puter only. To playback music from a USB Drive,
connect the USB Drive to another USB Port on
the computer and select the USB Drive with the
Media Playback Program.
The di322 USB Input is compatible with PC
Computers using Microsoft®, Windows 7 (SP1) and
Windows 8.1. It is also compatible with Apple® Ma-
cintosh® Computers using OS-10.6.8 or later.
When using a PC Computer with Windows, a spe-
cial Wadia USB Audio Software Driver needs to be
installed on the PC Computer. The driver needs to be
installed before connecting the di322 USB Input to the
USB Port on the computer.
Note: If an Apple Macintosh computer is used with the
di322, no additional driver is required.
The Wadia USB Audio Windows Driver is avail-
able for download from the Wadia Web Site:
http://www.Wadia.com/en-us/products/di322
Under "PRODUCTS select "di322" then scroll
down to the bottom of the Wadia di322 to the
"DOWNLOAD AREA". Select the "WADIA di322
PC DRIVER SETUP" and download the PC Windows
Driver. Follow the instructions below to install the
Wadia di322 Driver:
Purpose: To Install the Wadia USB Audio Windows
Driver for use with Wadia Products with
an USB-Digital Audio Input.
Requirements: 1. A PC Computer with a functioning
USB Port.
2. Windows 7 (SP1 or greater) or
Windows 8 (8.1) Operating System.
3. An USB Cable with Type A to
Type B Connectors.
Installing the Software
It is important to first install the downloaded software
on your computer before connecting the Wadia Prod-
uct to the computer. The USB Driver is included in the
downloaded software package.
Note: Before installing this software, please check to see
if the Wadia Product(s) with the USB-Digital Audio
Input has the latest firmware version, if not update
the firmware first.
1. Unzip the downloaded Wadia Windows USB
Driver Software Package.
2. Run
"WadiaHDSwPkgSetup.msi"
71 thru 76.
3. When the Windows Security window appears
check the
Always trust software from "Savitech
box and then the Install button. When the
Corp."
software has been installed it is necessary to re-
boot the computer. Refer to figures 76 thru 78.
After rebooting, a Wadia-HD icon will ap-
pear on the desktop. Refer to figure 79.
Figure 71
Figure 73
. Refer to figures
Figure 75
Figure 77
USB Connection
Connect the USB Cable with Type
A to Type B connectors between the
PC Computer and the Wadia Prod-
Figure 72
uct with the USB-Digital Audio Input. An Icon will
appear On-Screen indicating Windows has found new
How to Operate the di322
Figure 74
Figure 76
Figure 78
Figure 79
17