Ram Code Listexplanation - Sanyo SFX-110 Service Manual

6-4. RAM CODE LIST explanation
FEATURE SW. (FOR USER) —...-.
.— —.... .— .-— —— ...
SW No.
Setting items Setting No. Contents Fact. set Explanation
00
Dial form 00 TONE
01
01 DP
05
No. of Redial for timer 00
No redial This is to set the number of repeat call
Tx. 01
1
time attempts when the called
party is busy or no
02 2 times
response. (2-3 min. interval between each
03
3 times 03 call. This is also effective for Polling Rx.)
06
No. of Redial
for 00
No redial This is to set the number of repeat call
immediateTx. using
01
1 time attempts when the called party is busy or no
O.TLSpeed/Num key 02 2 times 02 response.
03
3 times (2-3 min. interval between each call. This is
also effective for Polling Rx.)
07 No. of rings before the 00 Short ring
Number of
rings the SFX-210 issues before
line is connected
01 1
times the line is connected when an incoming call is
02
2 times received in the AUTO mode.
03
3 times
03
I I
11 11 times
08
Remote reception 00 OFF No remote reception
10 10
*Remote activation No. is defined.
I I 33 Any 2 digits No. from 10 to 99 can be
99 99 selected
09 No.of rings that sounds 00
No ringing No Tel/Fax switchover
after the line is
01
3 times
+Number of rings that sounds before the
connected
02 5 times SFX-21 Oswitches from telephone mode to
03
7 times 03 fax reception mode
when a manual fax
04 9 times transmission or voice call is received in the
05 11 times AUTO mode.
10 Hold melody 00 Silence This is to set the melody released to the
(No melody)
telephone line
when the conversation is put
01 GREEN SLEEVES 01 on hold.
17 Key operation sound 00
OFF
This is to set whether the key operation
01 ON
(IOW)
sound generates or not.
02 ON (high)
02
20 Header print 01
ON(outside original) 01
Determines whether your station name, fax
02 ON(inside original) No. and date/time are printed on the outside
or inside of the original.
26 Closed network
00 OFF
00 Determines whether reception is restricted to
communication 01
Accept programmed fax number.
(Receiving)
02
Refuse
27 Transmission
mode 00 Standard
– +Return
to the position after Tx. or copy.
initial
01
Fine
02 Super fine
03
No initial 03
No initial is executed.
28 Original contrast initial 00
Normal
Same explanation on the above.
01 Light
02 Half tone
03
No initial 03
32 Timer Tx. reporl 00 OFF 00 No timer Tx. report is issued.
01
ON (after each bTimer Tx. reporl is issued after each timer Tx.
transmission)
02
ON
(when error ~Timer Tx. report is issued only when
Tx.
condition occur) error occurs.
.-
35