Haier HWD1000 User Manual page 10

Common Operation Issues
• Water remains in the detergent cup after the
cycle
– On occasion, soap may clump or cake blocking the
drain hole in the detergent cup, if the water in the
cup is clear no service is required.
– Inspect the detergent dispenser for foreign matter or
debris which might block the siphon process
– Be sure to use only HE soap
• Incorrect water temperature
– Verify the Hot water line is connected to the red
fitting and cold to the blue fitting. (Do not assume)
• Verify both water supplies are turned on
– Verify the Hot water temperature is at least 120 F
10