dji PHANTOM 3 PROFESSIONAL User Manual

Hide thumbs Also See for PHANTOM 3 PROFESSIONAL:

Quick start manual

User manual (58 pages)

Advanced manual (16 pages)

Table Of Contents

Table of Contents

Quick Links

PHANTOM 3

PROFESSIONAL

User Manual

V1.0

2015.05

Table of Contents

Need help?

Do you have a question about the PHANTOM 3 PROFESSIONAL and is the answer not in the manual?

Questions and answers

Summary of Contents for dji PHANTOM 3 PROFESSIONAL

Page 1 PHANTOM 3 PROFESSIONAL User Manual V1.0 2015.05...
Page 2: Read Before The First Flight
We recommend that you watch all tutorial videos on the official DJI website and read the Disclaimer before you fly. Prepare for your first flight by reviewing the Phantom 3 Professional Quick Start Guide and refer to the User Manual for more detailed information.
Page 3: Table Of Contents
Contents Using this manual Legends Read Before the First Flight Video Tutorials Download the DJI Pilot app Product Profile Introduction Feature Highlights Preparing the Aircraft Aircraft Diagram Remote Controller Diagram Aircraft Flight Controller Flight Mode Flight Status Indicator Return-to-Home (RTH)
Page 4 Discovery Flight Flight Environment Requirements Flight Limits and No-Fly Zones Preflight Checklist Calibrating the Compass Auto Takeoff and Auto Landing Flight Test Starting/Stopping the Motors Troubleshooting (FAQ) Appendix Specifications Intelligent Orientation Control (IOC) FCC Compliance © 2015 DJI. All Rights Reserved.
Page 6: Introduction
Vision Positioning System allows the aircraft to hover accurately in place. Feature Highlights Camera and Gimbal: With the Phantom 3 Professional, you’re shooting 4K video at up to 30 frames per second and capturing 12 megapixel photos that look crisper and cleaner than ever. An enhanced sensor gives you greater clarity, lower noise, and better pictures than any previous flying camera.
Page 7: Preparing The Aircraft
Phantom 3 Professional User Manual Preparing the Aircraft Removing Gimbal Clamp Remove the gimbal clamp by sliding it to the right (when facing the nose of the aircraft), as shown below. Attaching the Propellers: Mount the propellers with black nuts on to motors with black axes and spin counter-clockwise to secure.
Page 8: Aircraft Diagram
Phantom 3 Professional User Manual Aircraft Diagram [1] GPS [2] Propeller [3] Motor [4] Front LED Indicator [5] Landing gear [6] Gimbal and Camera [7] Aircraft Micro-USB Port [10] [8] Aircraft Status Indicator [11] [9] Intelligent Flight Battery [10] Vision Positioning Sensors...
Page 9 [9] Camera Settings Dial Turn the dial to adjust camera settings. [14] (Only functions when the remote controller is [10] [13] connected to a mobile device running the DJI Pilot app. ) [11] [12] [10] Playback Button Playback the captured images or videos.
Page 11: Flight Controller
Use the Flight Controller mode switch to change the flight mode of the aircraft, refer to the “Flight Mode Switch” on P26 for more information. Flight Status Indicator The Phantom 3 Professional has Front LEDs and Aircraft Status Indicators. The positions of these LEDs are shown in the figure below: Aircraft Status Indicator Front LED The Front LEDs show the orientation of the aircraft.
Page 12: Return-To-Home (Rth)
Use the RTH button on the remote controller (refer to “RTH button” on page 26 for more information) or tap the RTH button in the DJI Pilot app when GPS is available to initiate Smart RTH. The aircraft will then automatically return to the last recorded Home Point.
Page 13: Low Battery Rth
Low Battery RTH The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately when prompted.
Page 14: Failsafe Rth
The DJI Vision Positioning System uses ultrasound and image data to help the aircraft maintain its current position. With the help of Vision Positioning, your Phantom 3 Professional can hover in place more precisely and ﬂy indoors or in other environments where a GPS signal is not available. The main components of the Vision Positioning System are located on the bottom of your Phantom 3 Professional;...
Page 15 Phantom 3 Professional User Manual Using Vision Positioning Vision Positioning is activated automatically when the Phantom 3 Professional is turned on. No further action is required. Vision Positioning is typically used in indoor environments, where GPS is unavailable. Using the sensors that are built into the Vision Positioning system, the Phantom 3 Professional can hover precisely even without GPS.
Page 16: Flight Recorder
Micro-USB Port on the aircraft. Attaching and Detaching the Propellers Use only DJI approved propellers with your Phantom 3 Professional. The grey and black nuts on the propeller indicate where they should be attached and in which direction whey should spin. To attach the propellers properly, match the nut color with the motor axis color.
Page 17: Dji Intelligent Flight Battery
ONLY use original DJI propellers for a better and safer flight experience. DJI Intelligent Flight Battery The DJI Intelligent Flight Battery has a capacity of 4480 mAh, a voltage of 15.2 V, and a smart charge/ discharge functionality. It should only be charged using an appropriate charger that has been approved by DJI.
Page 18 Battery voltage should reach the appropriate level when operating environment with temperatures between -10°C and 5°C. 3. End the flight as soon as the DJI Pilot app displays the “Low Battery Level Warning” in low temperature environments. 4. Keep the battery indoors to warm it before flying in low temperature environments.
Page 19 20%~30% below 20% When battery life reaches 0%, it can no longer be used. For more information about the battery, launch the DJI Pilot app and check the information that is listed under the battery tab. © 2015 DJI. All Rights Reserved.
Page 20 Do not charge the Intelligent Flight Battery and remote controller with standard charger at the same time, otherwise the charger may overheat. Always turn off the battery before inserting it or removing it from the Phantom 3 Professional. Never insert or remove a battery when it is turned on.
Page 21 Launch the DJI Pilot app to check battery levels. Rapid : Fly the Phantom 3 Professional outdoors until there is less than 8% of power left, or until the battery can no longer be turned on.
Page 22: Remote Controller
Remote Controller This section describes the features of the remote controller and includes instructions for controlling the aircraft and the camera. © 2015 DJI. All Rights Reserved.
Page 23: Remote Controller Profile
Turning the Remote Controller On and Off The Phantom 3 Professional remote controller is powered by a 2S rechargeable battery that has a capacity of 6000 mAh. The battery level is indicated via the Battery Level LEDs on the front panel. Follow the steps below to turn on your remote controller: 1.
Page 24 Phantom 3 Professional User Manual Power Outlet Charger Power Button Controlling the Camera Shoot videos/pictures, view recorded images, and adjust camera settings via the Shutter Button, Camera Settings Dial, Playback Button, and Video Recording Button on the remote controller. [1] Camera Settings Dial Turn the dial to adjust camera settings such as ISO, shutter speed, and aperture without letting go of the remote controller.
Page 25 Moving the right stick control left and right changes the aircraft’s left and right pitch. Push left to fly left and right to fly right. The Phantom 3 Professional will hover in place if the stick is centered. Gimbal Dial: Turn the dial to the right, and the camera will shift to point upwards.
Page 26 IOC, refer to the IOC section in the Appendix. By default, the Flight Mode Switch is locked to P-mode. To unlock other flight modes, launch the DJI Pilot app, enter the “Camera” page, and tap “Mode”, then activate “Multiple Flight Mode”.
Page 27: Remote Controller Status Led
Phantom 3 Professional User Manual Connecting Your Mobile Device Tilt the mobile device holder to the desired position. Press the button on the side of the mobile device holder to release the clamp, and then place your mobile device into the cradle. Adjust the clamp down to secure the mobile device.
Page 28: Linking The Remote Controller
The remote controller is linked to your aircraft before delivery. Linking is only required when using a new remote controller for the first time. Follow these steps to link a new remote controller: 1. Turn on the remote controller and connect to the mobile device. Launch DJI Pilot app. 2. Turn on the Intelligent Flight Battery.
Page 29: Remote Controller Compliance Version
Phantom 3 Professional User Manual 4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and a beep is emitted. RC Control Setting RC Calibration Stick Mode Searching for aircraft frequency, timeout in 54 seconds Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.
Page 31: Camera Profile
The on-board camera uses the 1/2.3 inch CMOS sensor to capture video (up to 4096x2160p at 24fps with the Phantom 3 Professional) and 12 megapixel stills. You may export the video in either MOV or MP4 format. Available picture shooting modes include burst, continuous, and time-lapse mode. A live preview of what the camera sees can be monitored on the connected mobile device via the DJI Pilot app.
Page 32: Gimbal
Camera Operation Use the Shutter and Video Recording button on the remote controller to shoot the images or the videos through the DJI Pilot app. For more information about how to use these buttons, refer to “Controlling the Camera P24”.
Page 33 Phantom 3 Professional User Manual Anti-Drop Kit The anti-drop kit helps keep the gimbal and camera connected to the aircraft. Two pins have been mounted prior to shipping. If new or additional pins are required, see the diagram below. Press Part ①...
Page 35: Camera
Mountain View STORE DISCOVERY CAMERA DIRECTOR Camera The Camera page contains a live HD video feed from the Phantom 3 Professional’s camera. You can also configure various camera parameters from the Camera page. [17] P-GPS Safe to Fly (GPS) MODE...
Page 36 Phantom 3 Professional User Manual [1] Flight Mode : The text next to this icon indicates the current flight mode. Tap to configure the MC (Main Controller) Settings. These settings allow you to modify flight limits, perform compass calibration, and set the gain values.
Page 37 Phantom 3 Professional User Manual Record : Tap once to start recording video, then tap again to stop recording. You can also press the Video Recording Button on the remote controller, which has the same function. Playback : Tap to enter playback page. You can preview photos and videos as soon as they are captured.
Page 38: Director
“Director” from the app’s home screen. You can then select a template and a specified number of clips, which are automatically combined to create a short film that can be shared immediately. Store Tap “Store” to visit the official DJI Online Store to see the latest information about DJI products and easily buy new products. Discovery Sync pictures and videos to your mobile device, view flight logs, and check your DJI account status in "Discovery".
Page 40: Flight Environment Requirements
Flight Once pre-flight preparation is complete, it is recommended that you use the flight simulator in the DJI Pilot app to hone your flight skills and practice flying safely. Ensure that all flights are carried out in an open area.
Page 41 No-Fly Zones All No-Fly Zones are listed on the DJI official website at http://flysafe.dji.com/no-fly. No-Fly Zones are divided into Airports and Restricted Areas. Airports include major airports and flying field where manned aircraft operate at low altitudes. Restricted Areas include border lines between countries or sensitive institute.
Page 42 The value of R varies on the definition of the restricted areas. (3) A “warning zone” has been set around the Restricted Area. When the aircraft approaches within 0.6 miles (1 km) of this zone, a warning message will prompt from the DJI Pilot app. 100m 100m ©...
Page 43 Phantom 3 Professional User Manual GPS Signal Strong Blinking Green Aircraft Zone Restriction DJI Pilot App Prompt Status Indicator Warning: You are in a No-fly Motors will not start. zone. Take off prohibited. I f t h e a i r c r a f t e n t e r s t h e...
Page 44: Preflight Checklist
4. Gimbal is functioning normally. 5. Motors can start and are functioning normally. 6. The DJI Pilot app is successfully connected to the aircraft. Calibrating the Compass IMPORTANT: Always to calibrate the compass in every new flight location. The compass is very sensitive to electromagnetic interference, which can produce abnormal compass data and lead to poor flight performance or flight failure.
Page 45: Auto Takeoff And Auto Landing
2.When flying in a new location or in a location that is different from the most recent flight. 3.When the mechanical or physical structure of the Phantom 3 Professional has been changed. 4.When severe drifting occurs in flight, i.e. Phantom 3 Professional does not fly in straight line. Auto Takeoff and Auto Landing Auto Takeoff Use auto takeoff only if the Aircraft Status Indicators are blinking green.
Page 46: Flight Test
There are two methods to stop the motors. Method 1: When Phantom 3 Professional has landed, push the throttle down , then conduct the same CSC that was used to start the motors, as described above . Motors will stop immediately. Release both sticks once motors stop.
Page 47 Video Suggestions and Tips 1. Go through the full pre-flight checklist before each flight. 2. Select the desired gimbal operation mode in the DJI Pilot app. 3. Only shoot video when flying in P-mode. 4. Always fly in good weather and avoid flying in rain or heavy wind.
Page 49: Troubleshooting (Faq)
What app should I use with my Phantom 3? The Phantom 3 is compatible with the DJI Pilot app for iOS and Android, which is already used with the DJI Inspire 1. The app will detect which aircraft is connected and automatically adjust accordingly.
Page 50: Appendix
These controls can be changed to Mode 1 or set to a customized configuration in the DJI Pilot app. This is only recommended for advanced users.
Page 51 You may need to adjust the settings of your mobile device. Open the Settings menu, select the Privacy tab, select the Photos tab, and then toggle the switch next to the DJI Pilot app icon. If the Pilot app has not been granted access to your albums, the photos and videos cannot be synchronized.
Page 53: Specifications
UHD : 4096x2160p 24/25, 3840x2160p24/25/30 Video Recording Modes FHD:1920x1080p 24/25/30/48/50/60 HD:1280x720p 24/25/30/48/50/60 Max. Bitrate Of Video 60 Mbps Storage FAT32/exFAT Supported File Formats Photo: JPEG, DNG Video: MP4/MOV (MPEG-4 AVC/H.264) Operating Temperature 0°C to 40°C Range © 2015 DJI. All Rights Reserved.
Page 54 Phantom 3 Professional User Manual Remote Controller Operating Frequency 2.400 GHz-2.483 GHz Transmitting Distance 2000 m (Outdoor And Unobstructed) Video Output Port Operating Temperature Range 0°C- 40°C Battery 6000 mAh LiPo 2S Mobile Device Holder Tablets and smartphones Transmitter Power(EIRP) FCC: 20 dbm;...
Page 55: Intelligent Orientation Control (Ioc)
IOC allows users to lock the control orientation of aircraft in different modes. There are three working modes for IOC that can be selected in the DJI Pilot app. IOC only works when the aircraft is in F-mode, therefore the user must toggle the flight mode switch to activate IOC. Refer to the table below:...
Page 56: Fcc Compliance
Phantom 3 Professional User Manual FCC Compliance FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 57 Phantom 3 Professional User Manual susceptible d'en compromettre le fonctionnement. IC Radiation Exposure Statement: This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 58 The content is subject to change. Download the latest version from http://www.dji.com/phantom3 If you have any questions about this document, please contact DJI by sending a message to DocSupport@dji.com. © 2015 DJI. All Rights Reserved. © 2015 DJI. All Rights Reserved.

This manual is also suitable for:

Phantom 3

dji PHANTOM 3 PROFESSIONAL User Manual

Product Profile

Aircraft

Remote Controller

Camera and Gimbal

DJI Pilot App

Flight

Troubleshooting (FAQ)

Appendix

Appendix

Quick Links

Need help?

Questions and answers

Related Manuals for dji PHANTOM 3 PROFESSIONAL

Summary of Contents for dji PHANTOM 3 PROFESSIONAL

This manual is also suitable for:

Table of Contents