Messages Concerning Dr Command Progress - Fujitsu PRIMEQUEST 2000 Series Message Reference

Dynamic Reconfiguration Messages
dr-util:ERR:%d: Failed to send IPMI Command: Completion
[%d: 601, 603]
Meaning:
Failed to send IPMI Command
Corrective action:
The action in OS is unnecessary though there is a possibility that error information on IOU hot plug is not
correctly notified to MMB.
dr-util:ERR:622: <x> : Permission denied, <y>
Meaning:
Collaboration program<x> has no appropriate permission.
Corrective action:
Collaboration program<x> has no appropriate permission. Current mode is <y>.
Please add the execute permission to the collaboration program<x>
dr-util:ERR:630: Failed to send IPMI Command: OS Not Ready
Meaning:
Failed to send IPMI Command
Corrective action:
Please run "/etc/init.d/FJSvdr-util stop" manually.
When the improvement is not seen, trouble may occur in MMB.
dr-util:ERR:631: Failed to send IPMI Command: OS Ready
Meaning:
Failed to send IPMI Command
Corrective action:
DR cannot be operated from MMB.
Please run "/etc/init.d/FJSvdr-util start" manually.
When the improvement is not seen, trouble may occur in MMB.
3.5

Messages concerning DR command progress

dr-util:INFO:800: Detected SB hot-add.
Meaning:
SB hot-add was detected.
This indicates that OS detected SB-hotadd.
dr-util:INFO:801: Added SB <x>, Node <y>.
Meaning:
SB<x>, Node<y> was added.
This indicates that OS adds SB<x> and Node<y>
dr-util:INFO:802: Add CPU <x> (total <y>).
Meaning:
CPU<x> (total <y>) will be added.
This indicates that OS will add CPU<x>, total <y> of CPUs
dr-util:INFO:803: Added CPU <x> (total <y>).
Meaning:
CPU<x> (total<y>) was added.
This indicates that OS added CPU<x>, total <y> of CPUs.
dr-util:INFO:804: Add MEM <x> (total <y>) .
Meaning:
Memory<x> (total <y> kB) will be added.
This indicates that OS will add memory<x> (total<y> kB.)
dr-util:INFO:805: Added MEM <x> (total <y>).
Meaning:
Memory<x> (total <y> kB) was added.
This indicates that OS added memory<x> (total <y> kB)
210
CA92344-0540-06