Pair; Bluetooth Pairing; Nfc Pairing; Pair Another Phone - Plantronics Voyager Edge UC Series User Manual

Pair

Bluetooth pairing

NFC pairing

Pair Another Phone

NOTE
If your phone supports Near Field Communication (NFC), go to
1 Wearing your headset, power it on. You hear "welcome" in all the supported languages and then
"pairing" in the default language. The headset LED flashes red and blue.
®
2 Activate Bluetooth on your phone and set it to search for new devices.
Settings > Bluetooth > On*
• iPhone
™
Settings > Bluetooth: On > Scan for devices*
• Android
NOTE
*Menus may vary by device.
3 Select "PLT_Edge." If necessary, enter four zeros (0000) for the passcode or accept the
connection. Once successfully paired, you hear "pairing successful."
1 Ensure NFC is on and your phone's display is unlocked.
2 Tap and hold the headset to the phone's NFC tag location until NFC pairing completes. If
necessary, accept the connection.
TIP
Keep an eye on your Smartphone's screen for prompts to start and accept the pairing process.
NOTE The headset's NFC tag is located on the top of the headset. Phone NFC tag locations vary.
After pairing your headset to your phone, you may want to pair another phone.
1 Power on your headset.
2 Choose:
• Tap the Voice button and say "Pair mode"
• Press and hold the Call button
3 Activate Bluetooth on your phone and set it to search for new devices.
4 Select "PLT_Edge."
If necessary, enter four zeros (0000) for the passcode or accept the connection.
Once successfully paired, you hear "pairing successful" and the headset indicator lights stop
flashing.
until you hear "pairing"
NFC pairing.
6