Subaru EyeSight Owner's Manual
Subaru EyeSight Owner's Manual

Subaru EyeSight Owner's Manual

2015 impreza
Hide thumbs Also See for EyeSight:

Advertisement

About EyeSight

EyeSight

EyeSight is a driving support system that uses a range of functions to assist the driver in
making decisions in order to provide for more safe and comfortable driving and to reduce
driver fatigue. Making use of images created by stereo cameras specially designed by
SUBARU, EyeSight detects the vehicle in front, obstacles, traffic lanes and other items.
Drivers are responsible for driving safely. Always comply with all
traffic rules and regulations regardless of the fact that your vehicle
is equipped with EyeSight. Always maintain a safe following dis-
tance behind the vehicle in front of you, pay attention to your sur-
roundings and the driving conditions, operate the brake pedal and
take other action as necessary in order to maintain a safe following
distance.
Never attempt to drive relying on EyeSight alone.
EyeSight is intended to assist the driver in making decisions in
order to reduce the chance of accidents or damage and lessen the
burden on the driver.
When a warning is activated, pay attention to what is in front of you
and to your surroundings, operate the brake pedal and take other
action as necessary.
This system is not designed to support driving in poor visibility or
in extreme weather conditions, or to protect against careless driv-
ing when the driver is not paying complete attention to the road
ahead. It also cannot prevent collisions from occurring in all driving
conditions.
There are limits to the EyeSight recognition performance and con-
trol performance. Be sure to read the instructions for each function
before using the system, and always use it properly. Improper use
may lead to failure of control performance, which could cause an
accident.
Refer to the following pages for each function:
• For the Pre-Collision Braking System, refer to page 21.
• For Adaptive Cruise Control, refer to page 33.
• For Pre-Collision Throttle Management, refer to page 53.
• For Conventional Cruise Control, refer to page 66.
The EyeSight system in your vehicle is designed for use in coun-
tries in which traffic operates on the right-hand side of the road.
EyeSight for LHD vehicles such as yours is not designed for use in
countries in which vehicles are driven on the left-hand side of the
road.
• The system may not operate correctly under the conditions listed below.
When these conditions occur, turn off the Pre-Collision Braking System.
Also, do not use Adaptive and Conventional Cruise Control.
- The tire pressure is not correct.
- The temporary spare tire is installed on any wheel.
2
WARNING
*1
*1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EyeSight and is the answer not in the manual?

Questions and answers

Summary of Contents for Subaru EyeSight

  • Page 1 About EyeSight EyeSight EyeSight is a driving support system that uses a range of functions to assist the driver in making decisions in order to provide for more safe and comfortable driving and to reduce driver fatigue. Making use of images created by stereo cameras specially designed by SUBARU, EyeSight detects the vehicle in front, obstacles, traffic lanes and other items.
  • Page 2 - Tires other than those of the designated size are installed. - Flat tires have been fixed temporarily with a tire repair kit. - The suspension has been modified (including a genuine SUBARU sus- pension that has been modified). - Any object that disturbs the stereo cameras’ view is installed on the vehi- cle.
  • Page 3 • Detection by the EyeSight system is limited to objects that are within the range of the stereo cameras’ field of vision. Also, after an object enters the range of the cameras’...
  • Page 4 - Immediately after the engine starts • When there is a malfunction in the EyeSight system, turn off the Pre-Colli- ⇒ sion Braking System ( refer to page 31) and the Lane Departure Warning ⇒...
  • Page 5 About EyeSight NOTE • EyeSight records and stores the following data when the Pre-Collision Braking System is operated. It does not record conversations or other audio data. - Stereo camera image data - Distance from the vehicle in front - Vehicle speed...
  • Page 6 - Never touch the stereo camera lenses, and do not attempt to wipe or clean the lenses. Doing so could cause lens damage or contamination and lead to improper system performance. If you ever touch a lens for any reason, be sure to contact a SUBARU dealer. Continued on next page ⇒...
  • Page 7 - Do not change the positions where the stereo cameras are installed or modify any of the surrounding structures. • Do not install an interior rearview mirror other than a genuine SUBARU rearview mirror (such as a wide-type mirror) and the sun visor. Also, use the rearview mirror so that it does not obstruct the stereo cameras.
  • Page 8 (grey zones). Even if some accessories are installed on the outside of the prohibited areas, abnormal operation of EyeSight may occur due to the reflection of the light or any objects. In this situation, move the accessories. For details, contact a SUBARU dealer.
  • Page 9 • Do not install a film on the front windshield. The system may not operate correctly. • If there are scratches or cracks on the front windshield, contact a SUBARU dealer. • To have the front windshield replaced or repaired, contact a SUBARU dealer.
  • Page 10: Adaptive Cruise Control

    About EyeSight EyeSight Functions EyeSight includes the following functions. ■ Pre-Collision Braking System This function uses a following distance warning feature to warn the driver to take evasive action when there is the possibility of a collision with a vehicle or obstacle in front of the driver’s vehicle.
  • Page 11: Conventional Cruise Control

    This function can be used even when the stereo cameras have temporarily ⇒ stopped operating. ( Refer to page 80.) (This function is used by switching from Adaptive Cruise Control to Conventional Cruise Control.) ⇒ Refer to page 66. NOTE EyeSight does not operate when the engine is not running.
  • Page 12: Table Of Contents

    * Display units can be changed in Screen Settings. For details, refer to the Owner’s Manual for your vehicle. EyeSight display area (10) The pop-up screen area Adaptive Cruise Control indicator (11) EyeSight temporary stop indicator (White) Conventional Cruise Control indicator (12) EyeSight warning indicator (Yellow) READY indicator (13)
  • Page 13: Set Indicator

    About EyeSight ■ CRUISE indicator • This indicator illuminates when the main cruise control is on. : Adaptive Cruise Control (Adaptive Cruise Control indicator) : Conventional Cruise Control (Conventional Cruise Control indicator) ⇒ Refer to pages 39 and 66. • When Adaptive Cruise Control is set and the vehicle detects a car in front, this indicator (white) turns green.
  • Page 14: Set Vehicle Speed Display

    ■ EyeSight warning indicator (yellow) • This indicator illuminates or flashes when a malfunction occurs in the EyeSight system. • When it is illuminated or flashing, none of the EyeSight functions can be used (including Adaptive Cruise Control and the Pre-Collision Braking System, etc.).
  • Page 15: Lane Indicator

    Refer to page 62. ■ Brake System warning light • EyeSight system does not operate when the parking brake lever is pulled and brake sys- tem warning light is illuminated. • EyeSight system may function even if the brake warning light is illuminated when the parking brake lever is not pulled.
  • Page 16 About EyeSight Switch layout CANCEL switch RES/+ switch SET/- switch (CRUISE) switch (Following distance setting) switch Switch Switch (INFO)/SET switch S01329 (CRUISE) switch (Info)/SET switch (Following distance setting) switch switch RES/+ switch (Lane Departure Warning OFF) switch SET/- switch (Pre-Collision Braking System OFF) switch...
  • Page 17 • When this switch is pressed “ ” or “ ” appears on the EyeSight display area in the multi information display. This indicates that the main cruise control is turned on. ⇒ Refer to pages 39 and 68.
  • Page 18 About EyeSight ■ (Info)/SET switch This is used in the following situations. • When displaying the message that appeared in the pop-up screen area again. ⇒ Refer to page 84. • When changing the Warning Volume settings, etc. ⇒ Refer to page 82.
  • Page 19 About EyeSight ■ Multi function display (Non U.S. models) Set vehicle speed display Lead vehicle indicator Lead vehicle distance indicator Your own vehicle indicator Your own vehicle speed indicator S00885 ● Your own vehicle speed indicator Indicates your own vehicle speed with a red indicator.

Table of Contents