Advertisement
Hedge Trimmer
Model THT- 210B/SA/2000/SA/SLA/
HTD- 2520PFA/2522PFA/
HTS-2530PF
Handling instructions
Note:
Before using this machine, carefully read through these HANDLING INSTRUCTIONS
to ensure effi cient, safe operation. It is recommended that these INSTRUCTIONS be
kept readily available as an important reference when using this machine.
2100/SA/240B/2510S/
2520SA/2530/2540
2526PFA/2530PFA
THT-210SA
970-83205-200 2009.08
Advertisement
Related Manuals for Tanaka THT-210B
Summary of Contents for Tanaka THT-210B
-
Page 1: Hedge Trimmer
Hedge Trimmer Model THT- 210B/SA/2000/SA/SLA/ 2100/SA/240B/2510S/ 2520SA/2530/2540 HTD- 2520PFA/2522PFA/ 2526PFA/2530PFA HTS-2530PF Handling instructions THT-210SA Note: Before using this machine, carefully read through these HANDLING INSTRUCTIONS to ensure effi cient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this machine. 970-83205-200 2009.08... -
Page 2: Table Of Contents
MEANINGS OF SYMBOLS NOTE: Some units do not carry them symbols WARNING The following show symbols used for the machine. Be sure that you understand their meaning before use. It is important that you read, fully understand and observe the following safety precautions and warnings. Careless or improper use of the unit may cause serious or fatal injury. -
Page 3: What Is What
14. Choke lever 15. Lock button (optional) 16. Blade cover 17. Lock button 18. Priming pump 19. Combi box spanner 20. Handling instructions THT-240B THT-2510S THT-2530 THT-2540 HTS-2530PF THT-210B/ SA THT-2100/ SA/ 2000/ SA/ SLA THT-2520SA HTD-2520PFA/ 2522PFA HTD-2526PFA/ 2530PFA... -
Page 4: Warnings And Safety Instructions
If situations occur which are not covered in this manual, take care and ○ Replace parts that are cracked, chipped or damaged in any way use common sense. Contact your Tanaka dealer if you need assistance. before using the unit/machine. -
Page 5: Specifications
LwA (dB(A)) THT-2100/ SA ....104 (2000/14/EC) THT-2000/ SA/SLA ..104 Vibration level (m/s ) (ISO 7916) THT-210B/ SA ....4.2/ 4.5 Front handle THT-2100/ SLA .... 4.2 THT-2000/ SA/ SLA ..5.1/ 6.5/ 5.1 THT-210B/ SA ....3.7/ 5.2 Rear handle THT-2100/ SA .... - Page 6 THT-2510S HTD-2520PFA/ 2522PFA MODEL HTS-2530PF THT-2530/ 2540 HTD-2526PFA/ 2530PFA Engine Size (ml) NGK BPM-6A or BPMR-6A NGK BPM-6A or BPMR-6A NGK BPM-6A or BPMR-6A Spark Plug Champion RCJ-8Y Champion RCJ-8Y Champion RCJ-8Y Fuel Tank Capacity (l) 0.35 0.33 0.33 THT-2510S ....5.0 HTD-2520PFA ...4.8 Dry Weight (kg) THT-2530 .....5.2...
-
Page 7: Assembly Procedures
○ Use genuine two-cycle oil or use a mix between 25:1 to 50:1, Fig. 4 please consult the oil bottle for the ratio or Tanaka dealer. ○ If genuine oil is not available, use an anti-oxidant added quality oil expressly labeled for air-cooled 2-cycle engine use (JASO FC GRADE OIL or ISO EGC GRADE). - Page 8 Cutting When cutting, operate engine at full throttle as this maintains proper cutter speed. When trimming top of hedge, hold trimmer so blades are between 15 and 30 degrees from a horizontal position and swing trimmer in an arc toward edge of hedge to sweep cuttings off . When trimming sides of hedge, hold blade vertically and swing unit in an arc.
-
Page 9: Maintenance
If the cutting attachment still rotates after idle speed adjustment, 0.6 mm contact Tanaka dealer. Fig. 15 NOTE In some areas, local law requires using a resistor spark plug to suppress ignition signals. - Page 10 Below you will fi nd some general maintenance instructions. For further Fuel fi lter (Fig. 19) information please contact your Tanaka dealer. Remove the fuel fi lter from the fuel tank and thoroughly wash it in solvent. After that, push the fi lter into the tank completely.
- Page 12 Code No. E99004211 G Printed in China...
Need help?
Do you have a question about the THT-210B and is the answer not in the manual?
Questions and answers