Service Mode; Test Print - Canon iP100 Technical Reference

1. SERVICE MODE

For details of each service mode, refer to the "iP100 Service Manual."
< Service Mode Operation Procedures >
1) With the printer power turned off, while pressing the Resume/Cancel button, press and hold the
Power button. (DO NOT release the buttons). The Power LED lights in green to indicate that a
function is selectable.
2) While holding the Power button, release the Resume/Cancel button after the Power LED lights in
green. (DO NOT release the Power button.)
3) While holding the Power button, press the Resume/Cancel button 2 times, and then release both
the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the
Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting with Alarm
LED.)
4) When the Power LED lights in green, press the Resume/Cancel button the specified number of
time(s) according to the function listed below, then press the Power button. (Each time the
Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and
Power in green, starting with Alarm LED.)
Time(s)
0 times
1 time
2 times
3 times
4 times
5 times
6 times
7 to 9 times
10 times
11 to 12 times
13 times
14 times or more
< Service Test Print >
1) EEPROM information contents
On the service test print (sample below), confirm the EEPROM information.
- Top area: iP100:
M=V x.xx:
USB=(xxxxxx):
TIC=xxxxxxxx:
SET=JPN:
- Bottom area: FA=xx xx xx xx:
iP100JPN(under the bar code): Model name and Destination
2) Print check items
On the service test print (sample below), confirm the following items:
- Check 1: Top of form accuracy, skewed paper feeding, left margin, and carriage (outermost)
Function
Soft-power-off (Even when the print head is not installed, the carriage returns
and locks in the home position capped.)
Service test print
EEPROM information print
EEPROM initialization
Ink absorber counter resetting
Destination settings
Print head deep cleaning
Return to the menu selection
LF / Eject correction
Return to the menu selection
Ink absorber counter setting
Return to the menu selection
(If the Resume/Cancel button is pressed 14 or more times, the Power LED
lights steadily without any changes.)
Model name
ROM version
USB serial number
Timer IC information
Destination
Process inspection information
(3/22)