Pairing With Bluetooth Devices; Pairing The 10U With Bluetooth Devices; Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo Device; Second Mobile Phone Pairing - Second Mobile Phone, Gps, And Sr10 - Sena 10U User Manual

10U

5 PAIRING THE 10U WITH BLUETOOTH DEVICES

Before using the 10U Bluetooth headset with any other Bluetooth
devices for the first time, you will need to pair them together. You can
pair the 10U with Bluetooth mobile phones, Bluetooth stereo devices
such as MP3 players, or motorcycle specific Bluetooth GPS navigation,
and with other Sena Bluetooth headsets. The pairing operation is
required only once for each Bluetooth device. The headset remains
paired with the devices and automatically reconnects to them when
they are within range. You will hear a high toned single beep and a
voice prompt whenever the headset reconnects to the paired device
: "Phone connected" to a mobile phone, "Media connected" to a
Bluetooth stereo device.
5.1 Mobile Phone Pairing - Mobile Phone, Bluetooth Stereo
Device
Follow the procedure below to pair a mobile phone or a Bluetooth stereo
device such as an MP3 player with your 10U.
1. Press and hold the Joystick for 5 seconds until you hear a voice
prompt, "Phone pairing".
2. Search for Bluetooth devices on your mobile phone. Select the Sena
10U in the list of the devices detected on the mobile phone.
24
3. Enter 0000 for the PIN. Some mobile phones may not ask for the PIN.
4. The mobile phone confirms that pairing has been completed and the
10U is ready to use. You will hear a voice prompt, "Your headset is
paired".
5. If the pairing process is not completed within three minutes, the 10U
will return to stand-by mode.
Note:
1. If the Bluetooth connection between the headset and a mobile phone is
disconnected, tap the Rear Button to recover the Bluetooth connection
immediately.
2. If the Bluetooth connection between the headset and a media player is
disconnected, press the Joystick for 1 second to recover the Bluetooth
connection and play.
5.2 Second Mobile Phone Pairing - Second Mobile Phone,
GPS, and SR10
Typical Bluetooth headsets can connect with only one HFP (Hands-Free-
Profile) Bluetooth device such as mobile phone, GPS, and Sena SR10,
but second mobile phone pairing allows the headset to connect with two
HFP devices simultaneously. So, when you already have a mobile phone
connected with the 10U, you can also pair and connect a second mobile
phone or other HFP devices.