Connecting A Paired Bluetooth Device; Disconnecting A Bluetooth Device - Panasonic SC-ALL2 Operating Instructions Manual

∫ Connecting a paired Bluetooth
1
Touch [
≥ [ ] blinks slowly.
≥ If [ ] lights, a Bluetooth
Disconnect it. (l below)
2
Select "SC-ALL2" from the Bluetooth
menu.
3
Start playback on the Bluetooth
∫ Disconnecting a Bluetooth
Touch and hold [
≥ [ ] blinks slowly.
≥ If prompted for the passkey, input "0000".
≥ You can register up to 8 devices with this unit. If a 9th device is paired, the
device that has not been used for the longest time will be replaced.
≥ When [ ] is selected as the source, this unit will automatically try and
connect to the last connected Bluetooth
try to establish a connection again.
≥ When the unit is selected as the speakers powered by AllPlay or DLNA, the
audio source will change to the network.
≥ Bluetooth cannot be selected as the audio source when the unit is waiting for
®
the WPS PUSH or WPS PIN code connection.
≥ This unit can only be connected to one device at a time.
≥ When enjoying video contents with this function, the video and audio output
may not be synchronised.
].
®
] for at least 2 seconds.
device
®
device is already connected with this unit.
device.
®
device
®
device. If the connection attempt fails,
®
- 31 -
device's Bluetooth
® ®