Maintenance Menu; Overview - Sony SRW-5000 Maintenance Manual

3-3. MAINTENANCE Menu

3-3-1. Overview

The MAINTENANCE menu is mainly used to check the
unit.
On the MAINTENANCE INFORMATION menu, press
the [F8] (MAINTE EXEC) key while pressing the [SFT]
(SHIFT) key.
The MAINTENANCE menu appears.
MAINTENANCE
F1
ROM
F2
MAINTE
PANEL
CHECK
F3
SERVO
CHECK
F4
DT SDOUT
DIAG
CHECK CHECK CHECK
ALT F5 F6 F7
[F2] (ROM MAINTE) Key
Downloads ROM data on this unit.
(Refer to Section 3-3-2.)
[F3] (PANEL CHECK) Key
Performs the self-diagnosis of the control panel.
(Refer to Section 3-3-3.)
[F4] (SERVO CHECK) Key
Checks the servo system. (Refer to Section 3-3-4.)
[F5] (DT CHECK) Key
Checks the DT system. (Refer to Section 3-3-5.)
[F6] (SD OUT CHECK) Key
Checks the down converter system.
(Refer to Section 3-3-6.)
[F7] (RF CHECK) Key
Checks the RF system. (Refer to Section 3-3-7.)
[F8] (A/V CHECK) Key
Sets up system E-E function and the audio/video test signal
generator built in this unit for the maintenance mode.
(Refer to Section 3-3-8.)
3-8
RF A/V OTHERS EXIT
CHECK CHECK
F8 F9 F10
[F9] (OTHERS CHECK) Key
Sets the system and the network of this unit.
(Refer to Section 3-3-9.)
[F10] (EXIT) Key
Exits the MAINTENANCE menu, and returns to the
MAINTENANCE INFORMATION menu.
SRW-5000/5500