Table of Contents
Advertisement
Answering System
Remote commands
You can press dial keys to access certain
answering system functions without waiting for
the voice guidance to prompt you.
Key
Operation
1
Repeat message
(during playback)
2
Skip message
(during playback)
4
Play new messages
5
Play all messages
6
Play greeting message
7
Record greeting message
9
Stop recording
Stop playback
0
Turn answering system off
*4
Erase currently playing message
*5
Erase all messages
*6
Reset to a pre-recorded greeting
message (during greeting message
playback)
*#
End remote operation
(or hang up)
*1
If pressed within the first 5 seconds of a
message, the previous message is
played.
Turning on the answering system
remotely
1
Dial your phone number from a
touch-tone phone.
2
Let the phone ring 20 times.
R A long beep is heard.
3
Enter your remote access code within 10
seconds after the long beep.
R The greeting message is played back.
R You can either hang up, or enter your
remote access code again and begin
remote operation (page 33).
34
TGC21x_22xE_OI_(en-en)_0402_ver.110.pdf
*1
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
34
Answering system settings
Call screening
While a caller is leaving a message, you can
listen to the call through the handset's
speaker. To adjust the speaker volume, press
MDN or MCN repeatedly. You can answer the call
by pressing M
N on the handset. Call
screening can be set for each handset. The
default setting is "On".
1
M
N#310
2
MbN: Select the desired setting. a MOKN
a M
N
Number of rings before the unit
answers a call
You can change the "Number of Rings"
before the unit answers a call. You can select
2 to 9 rings, or "Auto".
The default setting is "5 Rings".
"Auto": The unit's answering system answers
at the end of the 2nd ring when new
messages have been recorded, or at the end
of the 5th ring when there are no new
messages. If you call your phone from outside
to listen to new messages (page 33), you
know that there are no new messages when
the phone rings for the 3rd time. You can then
hang up without being charged for the call.
1
M
N#211
2
MbN: Select the desired setting. a MOKN
a M
N
For voice mail service subscribers
To receive voice mail and use answering
system properly, please note the following:
R To use the voice mail service (page 36)
provided by your service provider/telephone
company rather than the unit's answering
system, turn off the answering system
(page 31).
R To use this unit's answering system rather
than the voice mail service provided by
your service provider/telephone company,
2014/04/02
19:29:47
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KX-TGC210E and is the answer not in the manual?
Questions and answers
I SET MY PHONE TO RING ONLY 2 TIMES, BUT IT STILL RINGS 5 TIMES. THE PHONE MENU CONFIRMS THAT THE RING COUNT IS 2.
The Panasonic KX-TGC210E phone may still ring 5 times despite being set to ring only 2 times because the ability to remove the first ring depends on the service provider or telephone company. The document states that the first ring can only be removed if the unit rings 2 times or more by default, which is controlled by the service provider. If the provider does not allow this adjustment, the phone will continue to ring more times than set.
This answer is automatically generated