Table of Contents
Advertisement
Programming
Nuisance call block
This feature rejects calls from unwanted
callers (Caller ID subscribers only). The
following items are available when storing
phone numbers in the call block list (30 max.).
– "Single Number": The unit can reject
calls from specific phone numbers.
– "Range of Numbers": The unit can
reject calls that begin with a number stored
in the call block list, such as a toll-free
phone number prefix or certain area codes.
You can also set the unit to reject calls that do
not have a phone number.
When a call is received, the unit does not ring
while the caller is being identified. If the
caller's phone number matches an entry in the
call block list, the unit emits no sound to the
caller, and disconnects the call.
Important:
R Rejected calls are logged in the caller list.
Storing unwanted callers
Storing a single phone number
Important:
R You must include the area code when
storing phone numbers in the call block list.
n From the caller list:
1
M N
2
MbN: Select the entry to be blocked. a
M
N
3
MbN: "Save CID" a MOKN
4
MbN: "Nuisance Call Block" a
MOKN
5
MbN: "Yes" a MOKN a M
n By entering phone numbers:
1
M
N#217
2
MbN: "Single Number" a MOKN
3
M
N a MbN: "Add" a MOKN
4
Enter the phone number (24 digits
max.).
R To erase a digit, press MCN.
5
MOKN a M
N
26
TGC21x_22xE_OI_(en-en)_0402_ver.110.pdf
N
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
26
Storing a range of numbers
1
M
N#217
2
MbN: "Range of Numbers" a MOKN
3
M
N a MbN: "Add" a MOKN
4
Enter the desired number (2-8 digits).
R To erase a digit, press MCN.
5
MOKN a M
N
Blocking incoming calls that
have no phone number
You can reject calls when no phone number is
provided, such as private callers.
1
M
N#240
2
MbN: Select the desired setting. a MOKN
3
M
N
Viewing/editing/erasing call
block numbers
1
M
N#217
2
MbN: "Single Number" or "Range of
Numbers" a MOKN
3
MbN: Select the desired entry.
R To exit, press M
4
To edit a number:
M
N a Edit the number. a MOKN a
M
N
To erase a number:
M
N a MbN: "Yes" a MOKN a M
Note:
R When editing, press the desired dial key to
add, MCN to erase.
Erasing all call block numbers
1
M
N#217
2
MbN: "Single Number" or "Range of
Numbers" a MOKN
3
M
N a MbN: "Erase All" a MOKN
4
MbN: "Yes" a MOKN
N.
N
2014/04/02
19:29:46
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the KX-TGC210E and is the answer not in the manual?
Questions and answers
I SET MY PHONE TO RING ONLY 2 TIMES, BUT IT STILL RINGS 5 TIMES. THE PHONE MENU CONFIRMS THAT THE RING COUNT IS 2.
The Panasonic KX-TGC210E phone may still ring 5 times despite being set to ring only 2 times because the ability to remove the first ring depends on the service provider or telephone company. The document states that the first ring can only be removed if the unit rings 2 times or more by default, which is controlled by the service provider. If the provider does not allow this adjustment, the phone will continue to ring more times than set.
This answer is automatically generated